Complete 99-00 gt2560r turbo kit with xede and 550cc injectors
#1
Junior Member
Thread Starter
iTrader: (16)
Join Date: Aug 2006
Location: Ft lauderdale FL
Posts: 405
Total Cats: 2
Complete 99-00 gt2560r turbo kit with xede and 550cc injectors
CHRISTMAS SPECIAL
I am parting out my personal race car and building an FC ls1
COMPLETE PHOTOS ARE LOCATED HERE
built bottom end and turbo kit pictures by gdnimr0d - Photobucket
The turbo kit and turbo have less than 10,000 miles on them
The kit contains:
-Bell engineering cast t25 manifold for 99-00 with proper egr fitting and also retrofitted with their newer larger diamater studs
-Bell engineering two piece steel downpipe with flex pipe
-Garrett Gt2560r Ball bearing turbocharger
-flyin miata oil feed line with proper T fitting to block
-flyin miata coolant lines
-10an ss return line with all AN fittings
-flyin miata adjustable wastegate and wastegate bracket
-flyin miata silicone intercooler piping with aluminum piping adapter for the bosch diverter valve on the piping
-Ebay intercooler that fits perfectly flush to the factory radiator but isnt the full length of the radiator
-flying miata intake with adapters for the ait sensor and breather on valve cover
-Xede with a safe tune**** for 10 psi and 550cc injectors from an rx7 which are plug and play with the 99-00
-Xede 99-00 plug and play wiring harness adapter
This is a bullet proof setup that I competed and won with.
***The tune is not guaranteed to work with your motor because the motor i have is a built and bored out motor
THE TUNE IS FOR AN 84MM block with wiseco low compression pistons and carillo h Beam rods with all of the ARP hardware for the head and bottom end THE BLOCK IS ALSO FOR SALE
FIRST COME FIRST SERVE TURBO KIT IS 2500
and THE BUILT BOTTOM END comes with the oil pan with welded on oil return fitting - 1000 (just the built block with oil pan under 10,000 miles)
COMPLETE PHOTOS ARE LOCATED HERE
built bottom end and turbo kit pictures by gdnimr0d - Photobucket
Contact me at ryanckaufman@gmail.com
or call me at 754 244 1755
Thanks
Ryan K
I am parting out my personal race car and building an FC ls1
COMPLETE PHOTOS ARE LOCATED HERE
built bottom end and turbo kit pictures by gdnimr0d - Photobucket
The turbo kit and turbo have less than 10,000 miles on them
The kit contains:
-Bell engineering cast t25 manifold for 99-00 with proper egr fitting and also retrofitted with their newer larger diamater studs
-Bell engineering two piece steel downpipe with flex pipe
-Garrett Gt2560r Ball bearing turbocharger
-flyin miata oil feed line with proper T fitting to block
-flyin miata coolant lines
-10an ss return line with all AN fittings
-flyin miata adjustable wastegate and wastegate bracket
-flyin miata silicone intercooler piping with aluminum piping adapter for the bosch diverter valve on the piping
-Ebay intercooler that fits perfectly flush to the factory radiator but isnt the full length of the radiator
-flying miata intake with adapters for the ait sensor and breather on valve cover
-Xede with a safe tune**** for 10 psi and 550cc injectors from an rx7 which are plug and play with the 99-00
-Xede 99-00 plug and play wiring harness adapter
This is a bullet proof setup that I competed and won with.
***The tune is not guaranteed to work with your motor because the motor i have is a built and bored out motor
THE TUNE IS FOR AN 84MM block with wiseco low compression pistons and carillo h Beam rods with all of the ARP hardware for the head and bottom end THE BLOCK IS ALSO FOR SALE
FIRST COME FIRST SERVE TURBO KIT IS 2500
and THE BUILT BOTTOM END comes with the oil pan with welded on oil return fitting - 1000 (just the built block with oil pan under 10,000 miles)
COMPLETE PHOTOS ARE LOCATED HERE
built bottom end and turbo kit pictures by gdnimr0d - Photobucket
Contact me at ryanckaufman@gmail.com
or call me at 754 244 1755
Thanks
Ryan K
#8
Senior Member
iTrader: (2)
Join Date: Sep 2009
Location: Edmonton, AB, Canada
Posts: 1,193
Total Cats: 29
no not ebay....
This is a tough couple of weeks to sell a Turbo kit. People want candy canes, big tv's and sugarplums. The 2nd or 3rd week of January and it goes back to normal...
New Years relolution for NA people here = go FI !!
This is a tough couple of weeks to sell a Turbo kit. People want candy canes, big tv's and sugarplums. The 2nd or 3rd week of January and it goes back to normal...
New Years relolution for NA people here = go FI !!