Parts for everyone!
03-19-2012, 11:29 PM
#1
Senior Member
Thread Starter
iTrader: (12)
Join Date: May 2008
Location: Roselle, Illinois
Posts: 849
Total Cats: -34
Parts for everyone!
I need to send my b6t off to the machine shop to get pistons installed and rings replaced, so i need to raise some cash. everything includes shipping Con US, If your in Canada PM for a shipping price. I have lots more to sell so keep checking for updates.
First up is a MS1
2.2 board
2.5 bar map sensor
29y4 version software
comes complete with harness, locked out distributor and tuning cable
This came off my running festiva, everything seems to work but im having a problem with a missfire once the car warms up, I have changed plugs,wires, cap, rotor, distributor pick up, swapped out the coil and nothing has seemed to help,\. I have been running the car like this for the last 2 years. Im not sure if the miss could be something with the computer, tuning or possibly a bad sensor? I bought the car with the Megasquirt installed, it was assembled by a friend. The unit also had water damage (car leaked water when it rained) it shorted out 2 of the injector drivers, these where replaced about a year ago. Before I pulled the computer and harness i made a video of it up and running. Im selling this as is, fix it or use it for parts. wiring is pretty simple and i will label the wires. I offer no tech support for unit, i will email you a copy of the current tune that is burned into the unit.
200.00 shipped obo, will include the blaster coil for $25 if bought as a bundle, coil on its own is $30
Festiva 1.8 GTX clutch, This came off a BPT i received, clutch appears to have very low miles! would be a great upgrade for a b6t(will need a bp flywheel to work with 1.6) or a bp/bpt replacement, its heavy, i think i might be able to fit it in a flat rate box 40.00 shipped
probe/mx6 intercooler
35 shipped
Good Vj11 (off probe/mx6) this a direct bolt on to the vj14 exhaust side, this will give you a bigger cold side compared to the stock b6t vj14. Very good condition no shaft play! the exhaust houseing had a crack by the waste gate. i have the exhaust side but its cracked, its not worth shipping, so i will just ship it as you see it, unless you wish to pay additional for the exhaust side.
$80.00
stock festiva ignition lock cylinder with matching key
$25.00
clear corner lights, these are OEM ones that have cleared over time, one does have a crack but does not seem to be severe to cause leaking.
50.00 shipped con us.
EVERYTHING WILL BE SHIPPED ON SATURDAY, I work 12 hour days so shipping is hard during the week.
I will list more during the weekend stuff i know of off the top of my head but dont have pictures of
Bpt short block with oil pan No turbo or head, it has been sitting outside under a tarp
bpt head no cams ( I have 2)
ported bp05 head (got this with a motor, hand ported by some joe)
g5mr trans in parts, case is good, diff blew up the spider gears
full set of bpt g25mr swap mounts (includes both motor mounts and engine mount)
capri xr2 intercooler
BPT gtx intake manifold
First up is a MS1
2.2 board
2.5 bar map sensor
29y4 version software
comes complete with harness, locked out distributor and tuning cable
This came off my running festiva, everything seems to work but im having a problem with a missfire once the car warms up, I have changed plugs,wires, cap, rotor, distributor pick up, swapped out the coil and nothing has seemed to help,\. I have been running the car like this for the last 2 years. Im not sure if the miss could be something with the computer, tuning or possibly a bad sensor? I bought the car with the Megasquirt installed, it was assembled by a friend. The unit also had water damage (car leaked water when it rained) it shorted out 2 of the injector drivers, these where replaced about a year ago. Before I pulled the computer and harness i made a video of it up and running. Im selling this as is, fix it or use it for parts. wiring is pretty simple and i will label the wires. I offer no tech support for unit, i will email you a copy of the current tune that is burned into the unit.
200.00 shipped obo, will include the blaster coil for $25 if bought as a bundle, coil on its own is $30
Festiva 1.8 GTX clutch, This came off a BPT i received, clutch appears to have very low miles! would be a great upgrade for a b6t(will need a bp flywheel to work with 1.6) or a bp/bpt replacement, its heavy, i think i might be able to fit it in a flat rate box 40.00 shipped
probe/mx6 intercooler
35 shipped
Good Vj11 (off probe/mx6) this a direct bolt on to the vj14 exhaust side, this will give you a bigger cold side compared to the stock b6t vj14. Very good condition no shaft play! the exhaust houseing had a crack by the waste gate. i have the exhaust side but its cracked, its not worth shipping, so i will just ship it as you see it, unless you wish to pay additional for the exhaust side.
$80.00
stock festiva ignition lock cylinder with matching key
$25.00
clear corner lights, these are OEM ones that have cleared over time, one does have a crack but does not seem to be severe to cause leaking.
50.00 shipped con us.
EVERYTHING WILL BE SHIPPED ON SATURDAY, I work 12 hour days so shipping is hard during the week.
I will list more during the weekend stuff i know of off the top of my head but dont have pictures of
Bpt short block with oil pan No turbo or head, it has been sitting outside under a tarp
bpt head no cams ( I have 2)
ported bp05 head (got this with a motor, hand ported by some joe)
g5mr trans in parts, case is good, diff blew up the spider gears
full set of bpt g25mr swap mounts (includes both motor mounts and engine mount)
capri xr2 intercooler
BPT gtx intake manifold
Reply
0
0
03-20-2012, 12:33 PM
#5
Senior Member
Thread Starter
iTrader: (12)
Join Date: May 2008
Location: Roselle, Illinois
Posts: 849
Total Cats: -34
The head is complete other then the valve cover,and exhaust cam let me get some pictures and ill accept offers, I never ran the head so im not sure if its good I took it in in a trade.
Reply
0
0
03-26-2012, 11:33 PM
#12
Senior Member
Thread Starter
iTrader: (12)
Join Date: May 2008
Location: Roselle, Illinois
Posts: 849
Total Cats: -34
taking offers
CLEAN ford bp valve cover, would look good with the letters polichsed $55 shipped con us
Old industrial? Craftsman stick welder, comes with handle and a tool box full of sticks. i have a shield too, would like 150.00 picked up 220volt
Bpt short block (im keeping the front covers) i can seperate the pistons if someone just wants the low comp pistons and rods take it as is with flywheel for $125 picked up (psst this comes with a main bearing girdle, not sure if the miata's got this nice option?)
xr2 intake 30 shipped
stock b6t/bp cam gears 15 shipped con us. Use them for door *****, paper weights, wapons, multi purpose came gears!
ported bp05 head, im not sure if its good or not, it came with a bunch of bp stuff i bought, guy ported it him self. $75.00 picked up or $120.00 shipped con us
includes inake cam exhaust cam gear and distributo
CLEAN ford bp valve cover, would look good with the letters polichsed $55 shipped con us
Old industrial? Craftsman stick welder, comes with handle and a tool box full of sticks. i have a shield too, would like 150.00 picked up 220volt
Bpt short block (im keeping the front covers) i can seperate the pistons if someone just wants the low comp pistons and rods take it as is with flywheel for $125 picked up (psst this comes with a main bearing girdle, not sure if the miata's got this nice option?)
xr2 intake 30 shipped
stock b6t/bp cam gears 15 shipped con us. Use them for door *****, paper weights, wapons, multi purpose came gears!
ported bp05 head, im not sure if its good or not, it came with a bunch of bp stuff i bought, guy ported it him self. $75.00 picked up or $120.00 shipped con us
includes inake cam exhaust cam gear and distributo
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
russian
Miata parts for sale/trade
6
10-08-2015 03:01 PM
