Miata Parts Blowout! Turbo, Tony DP, misc...
06-04-2008, 03:17 PM
#1
Senior Member
Thread Starter
iTrader: (12)
Join Date: Nov 2005
Location: Murfreesboro, TN
Posts: 595
Total Cats: 3
Miata Parts Blowout! Turbo, Tony DP, misc...
I have tons of parts to get rid of. I have pictures of most and can get pictures of the rest upon request. All prices are without shipping or can be picked up in Murfreesboro, TN.
Greddy Turbo Kit for 90-93 Miata - 15-20K miles on kit. Manifold has relief cuts, upgraded hardware with studs and copper nuts from ATP turbo and Nordlock locking washers, high temp silicone couplers, braided stainless oil drain line, Vortech FPR and K&N air filter. The only thing you will need is a -8 AN to NPT adapter to connect to your drain pan. Turbo has been clocked 90 degrees, but can be returned to the manufacturers position upon request - $750.00
Upgraded 2.5" downpipe made by TurboTony - 2 piece with flex, 2 O2 bungs and band clamp - $200.00
Upgraded TurboTony 2.5" catalytic converter - will need if using 2.5" downpipe since it will not mate to the OEM cat - $50.00
Bowser Greddy turbo heat shield - clearanced for TurboTony downpipe -$35.00
High flow catalytic converter for use with OEM downpipe - $40.00
A pillar w/ dual gage pod - 25.00
90-93 automatic throttle body w/ variable TPS and ISC valve - Includes wiring pigtail, great if using a standalone ECU - $50.00
94-97 1.8 injectors - a great upgrade when using the base Greddy kit - $35.00
89-91 RX-7 460cc injectors - 3K miles since cleaned and balanced by Witchunter, plug and play high impedance, great for use with standalone ECU - $100.00
94-97 Flywheel - a great upgrade for more holding power with the turbo kit - $35.00
94-97 Clutch pressure plate and disc - needed for use with above flywheel, used but in good shape - $20.00
(2) 90-93 Coil packs - $25.00 each
(2) 90-93 Manual throttle bodies w/ ISC valve - $20.00 each
(2) 90-93 Fuel rails - make your own dual feed - $10.00 each
90-97 Manual antenna base - $10.00
90-93 Valve cover - great for painting, powder coating or polishing - $35.00
90-93 Intake manifold - great for painting, powder coating or polishing, does not include throttle body - $35.00
90-93 Valve cover painted w/ crinkle black - $60.00
90-93 Intake manifold, recently cleaned and bead blasted - $45.00
90-93 AFM, recently replaced - $50.00
90-93 Glovebox w/ key - $10.00
90-97 Gas door / trunk lever - $10.00
90-97 Right tail light - small crack, hardly noticeable - $20.00
90-97 Mesh grill - $20.00 - SOLD
90-97 Red rear bumper - minor scratches - $100.00
90-97 Red left front fender - minor scratches - $100.00
90-93 Open differential - $50.00
Pair of 90-93 axles - $35.00
Pair of 94-97 1 piece axles frozen to spindles, some damage to threads from trying to remove - $20.00
90-93 Drive shaft - $25.00
90-97 Left headlight lid - Montego Blue, make your own NACA ducted headlight lid - $15.00
90-93 Injectors - $25.00
90-93 Clutch pressure plate and disc - used but in good shape - $20.00
(2) 90-93 Flywheels - have lightened or resurfaced before you drop your transmission so no waiting -$25.00
Brand new GM 2 BAR map sensor with wiring pigtail - $40.00
90-93 Engine block and head - runs, but was overheated and has low compression on #2 and #3 due to warped valve seats, bottom end is fine -$100.00
90-93 Alternator - $25.00
90-97 Complete A/C system - everything need except relays and dash button to ad A/C to your non A/C miata - $75.00
90-97 Automatic radiator - all steel construction - no plastic tanks to break - $50.00
90-93 Igniter module - does not work, but great for wiring a COP conversion - $5.00
Greddy Turbo Kit for 90-93 Miata - 15-20K miles on kit. Manifold has relief cuts, upgraded hardware with studs and copper nuts from ATP turbo and Nordlock locking washers, high temp silicone couplers, braided stainless oil drain line, Vortech FPR and K&N air filter. The only thing you will need is a -8 AN to NPT adapter to connect to your drain pan. Turbo has been clocked 90 degrees, but can be returned to the manufacturers position upon request - $750.00
Upgraded 2.5" downpipe made by TurboTony - 2 piece with flex, 2 O2 bungs and band clamp - $200.00
Upgraded TurboTony 2.5" catalytic converter - will need if using 2.5" downpipe since it will not mate to the OEM cat - $50.00
Bowser Greddy turbo heat shield - clearanced for TurboTony downpipe -$35.00
High flow catalytic converter for use with OEM downpipe - $40.00
A pillar w/ dual gage pod - 25.00
90-93 automatic throttle body w/ variable TPS and ISC valve - Includes wiring pigtail, great if using a standalone ECU - $50.00
94-97 1.8 injectors - a great upgrade when using the base Greddy kit - $35.00
89-91 RX-7 460cc injectors - 3K miles since cleaned and balanced by Witchunter, plug and play high impedance, great for use with standalone ECU - $100.00
94-97 Flywheel - a great upgrade for more holding power with the turbo kit - $35.00
94-97 Clutch pressure plate and disc - needed for use with above flywheel, used but in good shape - $20.00
(2) 90-93 Coil packs - $25.00 each
(2) 90-93 Manual throttle bodies w/ ISC valve - $20.00 each
(2) 90-93 Fuel rails - make your own dual feed - $10.00 each
90-97 Manual antenna base - $10.00
90-93 Valve cover - great for painting, powder coating or polishing - $35.00
90-93 Intake manifold - great for painting, powder coating or polishing, does not include throttle body - $35.00
90-93 Valve cover painted w/ crinkle black - $60.00
90-93 Intake manifold, recently cleaned and bead blasted - $45.00
90-93 AFM, recently replaced - $50.00
90-93 Glovebox w/ key - $10.00
90-97 Gas door / trunk lever - $10.00
90-97 Right tail light - small crack, hardly noticeable - $20.00
90-97 Mesh grill - $20.00 - SOLD
90-97 Red rear bumper - minor scratches - $100.00
90-97 Red left front fender - minor scratches - $100.00
90-93 Open differential - $50.00
Pair of 90-93 axles - $35.00
Pair of 94-97 1 piece axles frozen to spindles, some damage to threads from trying to remove - $20.00
90-93 Drive shaft - $25.00
90-97 Left headlight lid - Montego Blue, make your own NACA ducted headlight lid - $15.00
90-93 Injectors - $25.00
90-93 Clutch pressure plate and disc - used but in good shape - $20.00
(2) 90-93 Flywheels - have lightened or resurfaced before you drop your transmission so no waiting -$25.00
Brand new GM 2 BAR map sensor with wiring pigtail - $40.00
90-93 Engine block and head - runs, but was overheated and has low compression on #2 and #3 due to warped valve seats, bottom end is fine -$100.00
90-93 Alternator - $25.00
90-97 Complete A/C system - everything need except relays and dash button to ad A/C to your non A/C miata - $75.00
90-97 Automatic radiator - all steel construction - no plastic tanks to break - $50.00
90-93 Igniter module - does not work, but great for wiring a COP conversion - $5.00
Last edited by sbrian2; 06-04-2008 at 07:08 PM.
Reply
0
0
06-04-2008, 04:23 PM
#3
Senior Member
Thread Starter
iTrader: (12)
Join Date: Nov 2005
Location: Murfreesboro, TN
Posts: 595
Total Cats: 3
I can save you or anyone else shipping to the ATL area since I will be down there at Atlanta Motor Speedway for the goodguys event on the 12th-14th if you are interested.
Reply
0
0
06-04-2008, 05:17 PM
#9
can you get me a price shipped for the motor to 33487 please?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Reply
0
0
