Almost complete DIY turbo setup
10-26-2009, 01:36 PM
#1
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Almost complete DIY turbo setup
I was going to upgrade my setup...but need money more than more speed...and have become content with what I've got after upgrading exhaust and going to COPS. I've been putting this off...but I don't have time to finish this with school...and just need to sell it before I end up out in the garage trying to dump my baby IHI and putting the T25 on there. If you buy parts from me you will be helping boost my GPA this semester.
Parts available:
T25 turbo - makes boost...but needs a rebuild. Includes the special outlet bend. This is pretty much the perfect turbo for a street driven 1.6L. I REALLLLY wanted to upgrade to this...but I'm seriously on the verge of flunking out and a divorce...seriously.
SOLD
Pic of the setup on Sam's car...also showing the intake elbow for compressor:
OBX 1.6L turbo manifold -
SOLD
Custom downpipe - from Samamporful...and still in his hands. He can ship to you...or I'll get it to you as soon as it's in. This dp goes all the way back to end of cat...so consider it a cat delete/testpipe as well. Would bolt up to a cat-back exhaust.
SOLD
Bosch recirc BOV with BEGi piping - also still in Sam's possesion. Good setup...exactly like what I run with my current BEGi IHI kit.
SOLD
Big intercooler - will check dimensions when I get home...but it works with the "Stripes Pipes" kit below.
SOLD
Stripe's Pipes kit - Little rust and paint flaking...but this kit is so damn sturdy it doesn't matter...just grind and repaint. Will do this for you if you need and pay...but you'll be killing my study time. Comes with cheap BOV and all couplers adapters.
SOLD
Fidanza adjustable cam gear - bought thinking I needed it for top end...I don't.
SOLD
Devil's Own universal stage 1 kit - I will probably use this...but am putting it up if someone else really needs it and in case it's the first thing to sell. Has the four wire leads to the relay chewed through by a pup...but I will repair before shipping. This is considered in the price...and WILL NOT affect performance as there is tons of wire there (maybe they wanted this relay under dash?). Mangled part of harness on bottom left by nozzles (3 and 7 gph). I will likely repair this today.
$200
Mazda Protege 1.6L Valve Cover - (black) with gasket, used for exposing cam gears.
SOLD
Infinit M45 HID Assemblies One is missing the blinker bulb...the other is missing the high beam buld...the low-beam HIDs have everything there...and only need a 12+ and ground to run. Halo might be more complicated.
$75
Goodridge Stainless Brake Lines - new in box...don't really want to sell...but studying more than working these days.
SOLD
Oil temp, water temp and boost gauges with angled faceplate and sensors - water and boost are AutoMeter carbon lights or something. Have bulbs and sensors in bag. Will split up...just let me know what you need.
SOLD
All prices are considered a starting point and are NEGOTIABLE.
If you want any kind of package deal we can definitely work something out and save you some serious coin while helping me clean out the garage. They more parts gone the better since once I sell one part the rest of it is basically worthless to me.
If you want ALL of the turbo parts (excludes cam gear and WI) I will let it go for $550 or your close interpretation of its value. All the turbo parts came from Samamporful's recent FS thread...all the intercooler/piping parts came from jmknight's recent FS, as did the WI. Fidanza gear is new from Moss Motors.
Shipping will be actual on large parts...we can include it for most of the small parts.
I will get good pics tonight or tomorrow...but need to drum up interest.
Thanks for looking...take care.
-Damon
Parts available:
T25 turbo - makes boost...but needs a rebuild. Includes the special outlet bend. This is pretty much the perfect turbo for a street driven 1.6L. I REALLLLY wanted to upgrade to this...but I'm seriously on the verge of flunking out and a divorce...seriously.
SOLD
Pic of the setup on Sam's car...also showing the intake elbow for compressor:
OBX 1.6L turbo manifold -
SOLD
Custom downpipe - from Samamporful...and still in his hands. He can ship to you...or I'll get it to you as soon as it's in. This dp goes all the way back to end of cat...so consider it a cat delete/testpipe as well. Would bolt up to a cat-back exhaust.
SOLD
Bosch recirc BOV with BEGi piping - also still in Sam's possesion. Good setup...exactly like what I run with my current BEGi IHI kit.
SOLD
Big intercooler - will check dimensions when I get home...but it works with the "Stripes Pipes" kit below.
SOLD
Stripe's Pipes kit - Little rust and paint flaking...but this kit is so damn sturdy it doesn't matter...just grind and repaint. Will do this for you if you need and pay...but you'll be killing my study time. Comes with cheap BOV and all couplers adapters.
SOLD
Fidanza adjustable cam gear - bought thinking I needed it for top end...I don't.
SOLD
Devil's Own universal stage 1 kit - I will probably use this...but am putting it up if someone else really needs it and in case it's the first thing to sell. Has the four wire leads to the relay chewed through by a pup...but I will repair before shipping. This is considered in the price...and WILL NOT affect performance as there is tons of wire there (maybe they wanted this relay under dash?). Mangled part of harness on bottom left by nozzles (3 and 7 gph). I will likely repair this today.
$200
Mazda Protege 1.6L Valve Cover - (black) with gasket, used for exposing cam gears.
SOLD
Infinit M45 HID Assemblies One is missing the blinker bulb...the other is missing the high beam buld...the low-beam HIDs have everything there...and only need a 12+ and ground to run. Halo might be more complicated.
$75
Goodridge Stainless Brake Lines - new in box...don't really want to sell...but studying more than working these days.
SOLD
Oil temp, water temp and boost gauges with angled faceplate and sensors - water and boost are AutoMeter carbon lights or something. Have bulbs and sensors in bag. Will split up...just let me know what you need.
SOLD
All prices are considered a starting point and are NEGOTIABLE.
If you want any kind of package deal we can definitely work something out and save you some serious coin while helping me clean out the garage. They more parts gone the better since once I sell one part the rest of it is basically worthless to me.
If you want ALL of the turbo parts (excludes cam gear and WI) I will let it go for $550 or your close interpretation of its value. All the turbo parts came from Samamporful's recent FS thread...all the intercooler/piping parts came from jmknight's recent FS, as did the WI. Fidanza gear is new from Moss Motors.
Shipping will be actual on large parts...we can include it for most of the small parts.
I will get good pics tonight or tomorrow...but need to drum up interest.
Thanks for looking...take care.
-Damon
Last edited by gospeed81; 11-12-2009 at 09:14 PM.
0
10-27-2009, 10:09 AM
#10
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Updated with my own pics from this morning...and some items added.
Feel free to send offers...I priced everything high knowing you guys and your need to lowball. The worst I can do is say "no," but I'll probably just meet you in the middle and include shipping.
I would prefer to sell everything all at once...so more offers on more items means lower prices.
Thanks.
Feel free to send offers...I priced everything high knowing you guys and your need to lowball. The worst I can do is say "no," but I'll probably just meet you in the middle and include shipping.
I would prefer to sell everything all at once...so more offers on more items means lower prices.
Thanks.
Last edited by gospeed81; 10-27-2009 at 10:41 AM.
0
10-27-2009, 10:50 AM
#13
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Package deal 1:
Exhaust manifold
Downpipe
Turbo w/compressor elbows and wastegate actuator
Intercooler
Piping kit w/couplers
Bosch Recirc BOV with BEGi piping
$550 +shipping
Package deal 2:
WI
Cam gear
$250
Package deal 3:
Package 1 + Package 2
$750 + shipping
Package Deal 4:
Everything in thread
$1000
Exhaust manifold
Downpipe
Turbo w/compressor elbows and wastegate actuator
Intercooler
Piping kit w/couplers
Bosch Recirc BOV with BEGi piping
$550 +shipping
Package deal 2:
WI
Cam gear
$250
Package deal 3:
Package 1 + Package 2
$750 + shipping
Package Deal 4:
Everything in thread
$1000
Last edited by gospeed81; 10-27-2009 at 11:01 AM.
0
10-27-2009, 04:10 PM
#19
Junior Member
Join Date: Jul 2009
Location: Gulfport, MS
Posts: 47
Total Cats: 0
will this manifold work for the greddy turbo?
0
