Upgraded Greddy turbo kit

Closed Thread Subscribe

Thread Tools

Search this Thread

01-24-2014, 04:40 PM

albertogti117

Junior Member

Thread Starter

iTrader: (2)

Join Date: Jul 2011

Location: Houston, Tx

Posts: 167

Total Cats: 4

Upgraded Greddy turbo kit

Up for sale is an upgraded Greddy turbo kit for the 1.6. Only selling because I'm building a 1.8.

What you get:

Original Greddy - Very minimal shaft play.
Original Greddy manifold - A relief cut was made down the middle of the flange. I found this to be unnecessary as I had no cracking issues and no warping issues. The manifold slid right off the studs. I believe this was a fix Greddy made on their later kits.
ARtech 2.5" SG Downpipe - Bought this brand new so it was only used for 3,000 miles or so. Has bung welded for stock O2 sensor which I blocked off with a plug when I switched to Megasquirt. Also has WBO2 bung welded at the end of the pipe. Beautiful piece
Ebay intercooler core - Custom aluminium bracket and tapped for IAT.
-10 Oil drain - Flange and fitting off the turbo were from ARtech. Drain line was made by me using Aeroquip fittings and line.
Original Greddy oil feed
Wastegate actuator and bracket - I made a custom bracket out of a strip of aluminium because I clocked the turbo with the compressor outlet pointing down.
Intake pipe & filter - I used a 2.25" to 2.5" coupler off the turbo inlet to a 2.5" pipe. Electrical tape was used to increase the OD of the pipe to slide a 3" filter on. Kind of ghetto but it got the job done.
Stock 1.8 tan top injectors - One broken clip on one of them.
All the bolts and nuts that I used, labeled appropriately.
Original Greddy downpipe

Looking to get $1000 shipped OBO. Willing to trade for 5 or 6 speed, forged rods, Torsen LSD. Let me know if you have any questions. Located in Houston, Tx. Thanks for looking!