Dual Throttle body setup M45 or MP62
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Nov 2009
Location: Spartanburg, SC
Posts: 52
Total Cats: 0
Dual Throttle body setup M45 or MP62
I am going V8 so it is time to sell my Moss MP62 and accessories. Going turbo on my other car so will be looking for turbo parts.
The first item available is my DTB kit. I made this a couple of years ago and it takes care of the idle droop immediately. It also gives the car instant throttle response.
This is for a 94 to 97.
97 TB
94 automatic throttle cable. It's just a bit shorter and keeps you from having any slack in the cable.
Recirculating bypass valve with extra springs for adjustment
Hose and fitting to connect the bypass to the silicone hose after the MAF.
I used another throttle pulley put on backwards on the intake throttle. That makes 2 pulleys on the intake throttle body. This places it at the correct angle to get both TBs to open and close at the same time. (don't have a picture, but can explain it to you)
SC TB has the throttle screw set to just open the butterfly a crack.
Works great. $135 plus shipping.
The first item available is my DTB kit. I made this a couple of years ago and it takes care of the idle droop immediately. It also gives the car instant throttle response.
This is for a 94 to 97.
97 TB
94 automatic throttle cable. It's just a bit shorter and keeps you from having any slack in the cable.
Recirculating bypass valve with extra springs for adjustment
Hose and fitting to connect the bypass to the silicone hose after the MAF.
I used another throttle pulley put on backwards on the intake throttle. That makes 2 pulleys on the intake throttle body. This places it at the correct angle to get both TBs to open and close at the same time. (don't have a picture, but can explain it to you)
SC TB has the throttle screw set to just open the butterfly a crack.
Works great. $135 plus shipping.
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM