1.6 Motor with M45 for track setup, COP, Iron Mountain Alignment Sys
02-03-2015, 07:45 PM
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Location: South Bay, CA
Posts: 351
Total Cats: -2
1.6 Motor with M45 for track setup, COP, Iron Mountain Alignment Sys
1.6L with built bottom end (Supertech 8.8 pistons, Manley rods, ACL bearings, ARP Main/Head/Rod bolts) with balanced rotating assembly
M45 Sebring/JR Supercharger
Stock nose pulley, 150mm crank overlay
Custom CAI
OBX Header
DIY A/A over the radiator intercooler (Piping is beat up and thrown in for free)
RX-7 460cc injectors
Need to add a coolant re-route kit or reinstall the factory coolant routing parts. OEM parts will be included for free.
Whole setup has been made for track use so small coolant lines/vacuum lines/wiring has been capped or removed if not needed.
Setup worked great before being taken out but I am switching to the SuperMiata VVT motor to run in wheel to wheel.
I would like to sell the setup all together but will break apart certain pieces depending on how things sell. All prices are OBO. I am located in Orange County, CA and the parts are in Santa Fe Springs, CA. I have images of the dyno results from the engine setup (made 168whp/165wtq) and oil analysis.
Motor with supercharger setup, Intercooler + piping, COP = $2,700
Motor only (includes injectors, exhaust header) = $1,700
Supercharger setup only (includes supercharger, tensioner, crank pulley, intercooler + piping, intake) = $1,000
Toyota COP (includes coils, wiring, ignitor and mounting bracket shown on top of motor) = SOLD
Dyno results with this setup
What it looked like in the car
Other parts!!
Iron Canyon Alignment System (never been used. bought it but didn't put it to use) = Sold!!
Pair of red side mirrors (some scraps but look good) = SOLD
Trunk brake light = $15
Spark Plug wires and 1.6 Coil Pack = $30
M45 Sebring/JR Supercharger
Stock nose pulley, 150mm crank overlay
Custom CAI
OBX Header
DIY A/A over the radiator intercooler (Piping is beat up and thrown in for free)
RX-7 460cc injectors
Need to add a coolant re-route kit or reinstall the factory coolant routing parts. OEM parts will be included for free.
Whole setup has been made for track use so small coolant lines/vacuum lines/wiring has been capped or removed if not needed.
Setup worked great before being taken out but I am switching to the SuperMiata VVT motor to run in wheel to wheel.
I would like to sell the setup all together but will break apart certain pieces depending on how things sell. All prices are OBO. I am located in Orange County, CA and the parts are in Santa Fe Springs, CA. I have images of the dyno results from the engine setup (made 168whp/165wtq) and oil analysis.
Motor with supercharger setup, Intercooler + piping, COP = $2,700
Motor only (includes injectors, exhaust header) = $1,700
Supercharger setup only (includes supercharger, tensioner, crank pulley, intercooler + piping, intake) = $1,000
Toyota COP (includes coils, wiring, ignitor and mounting bracket shown on top of motor) = SOLD
Dyno results with this setup
What it looked like in the car
Other parts!!
Iron Canyon Alignment System (never been used. bought it but didn't put it to use) = Sold!!
Pair of red side mirrors (some scraps but look good) = SOLD
Trunk brake light = $15
Spark Plug wires and 1.6 Coil Pack = $30
Last edited by comradefks; 02-17-2015 at 11:48 AM.
Reply
0
0
02-08-2015, 12:13 PM
#6
Junior Member
Join Date: Dec 2010
Location: Greenville SC
Posts: 87
Total Cats: 0
Yo! How do I buy the mirrors? PayPal or credit card? Please email me at henryatsportscarsetcdotcom. Will take them. What is shipping? Or call at eight64-two60-nine988 (cell) or text.
My right side mirror got knocked off by a dang Honda at Charlotte Motor Speedway and all we have in the shop are power mirrors. Want the manual adjuster!
My right side mirror got knocked off by a dang Honda at Charlotte Motor Speedway and all we have in the shop are power mirrors. Want the manual adjuster!
Reply
0
0
02-27-2015, 11:03 AM
#13
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Location: South Bay, CA
Posts: 351
Total Cats: -2
Bump bump bump
I want to lower the price for the motor but for some reason it won't let me edit. $2,500 for motor with supercharger kit, $1,500 for motor alone.
Lets get this supercharger sold! $1075 shipped with intercooler, $1025 without for the continental 48.
I want to lower the price for the motor but for some reason it won't let me edit. $2,500 for motor with supercharger kit, $1,500 for motor alone.
Lets get this supercharger sold! $1075 shipped with intercooler, $1025 without for the continental 48.
Reply
0
0
03-03-2015, 07:15 PM
#16
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Location: South Bay, CA
Posts: 351
Total Cats: -2
I'm willing to ship it, shipped prices quoted above in post #13.
May interested people have asked about adapting it to a 1.8 and I really don't know exactly. Have heard the mounting bracket may be different and the throttle body may be different. Does somebody with more knowledge than me know the full answer?
May interested people have asked about adapting it to a 1.8 and I really don't know exactly. Have heard the mounting bracket may be different and the throttle body may be different. Does somebody with more knowledge than me know the full answer?
Reply
0
0
