DIY TURBO KIT FOR NA (1.6)
04-24-2014, 08:21 AM
#1
DIY TURBO KIT FOR NA (1.6)
Up for sale is my 1.6 turbo kit I have been piecing together for some time now. I was going to install it over the summer. However, my 15 1/2 year old want to have the Miata as his first car and I don't feel safe with it having more than stock HP with him being a new driver.
I have bolted the turbo, manifold and downpipe together in the garage so I know everything match correctly and there is no warping (Perfect example of BEGi quality) so with that said here is what I have to sell.
BEGi 1.6 Manifold (like new condition) 10mm Studs
BEGi 1.6 Downpipe (used with some splatted weld around the O2 port) it is in good/usable condition.
BEGi AFR (Was rebuild by BEGi prior to me purchasing) it is set an 8:1 to match my purple injectors (listed later)
Purple Miata injectors with new set of seals (in good condition)
TSE Inconel 10mm stud kit with a small bottle of Resbond (New in pack and everyone knows how much these cost
)
Garrett T25 Turbo (is used but in good condition) it's a journal bearing and I have never had it hook up, I don't feel any abnormal shaft play for a journal without oil running, I know these things are a floating type bearing. It is water and oil cooled and has an internal waste gate and actuator (I think the actuator on these are 5-7 psi, but don't quote me) It also has Braided oil inlet (-4AN) and coolant lines (3/8)
Fitting and 90 elbow for 1.6 oil supply (-4AN) along with multiple fittings and gaskets
JDM Miata intercooler kit (yes eBay) but it's the largest kit I've seen. Has BOV, a lot of clamps, a lot of silicone connectors, and many pieces of aluminum piping (45/90 degree and straight pieces)
SunPro Boost Gauge (CP8213) (New) I think it is 2 1/6 but I know it's the size that will fit the vent.
I would prefer to sale this as a complete kit and not split it at this time. All I'm after is to break even and I know shipping is going to be at least $150 to most places. I am asking $1500 with free shipping in the US.
If you see something you like you are welcome to make an offer.. If I can't sell the kit in a week or two I will be open to parting it out to the highest bidder.
*There are additional photos available on Photobucket so clicking on one of the pic should take you to the album.*
I have bolted the turbo, manifold and downpipe together in the garage so I know everything match correctly and there is no warping (Perfect example of BEGi quality) so with that said here is what I have to sell.
BEGi 1.6 Manifold (like new condition) 10mm Studs
BEGi 1.6 Downpipe (used with some splatted weld around the O2 port) it is in good/usable condition.
BEGi AFR (Was rebuild by BEGi prior to me purchasing) it is set an 8:1 to match my purple injectors (listed later)
Purple Miata injectors with new set of seals (in good condition)
TSE Inconel 10mm stud kit with a small bottle of Resbond (New in pack and everyone knows how much these cost
)
Garrett T25 Turbo (is used but in good condition) it's a journal bearing and I have never had it hook up, I don't feel any abnormal shaft play for a journal without oil running, I know these things are a floating type bearing. It is water and oil cooled and has an internal waste gate and actuator (I think the actuator on these are 5-7 psi, but don't quote me) It also has Braided oil inlet (-4AN) and coolant lines (3/8)
Fitting and 90 elbow for 1.6 oil supply (-4AN) along with multiple fittings and gaskets
JDM Miata intercooler kit (yes eBay) but it's the largest kit I've seen. Has BOV, a lot of clamps, a lot of silicone connectors, and many pieces of aluminum piping (45/90 degree and straight pieces)
SunPro Boost Gauge (CP8213) (New) I think it is 2 1/6 but I know it's the size that will fit the vent.
I would prefer to sale this as a complete kit and not split it at this time. All I'm after is to break even and I know shipping is going to be at least $150 to most places. I am asking $1500 with free shipping in the US.
If you see something you like you are welcome to make an offer.. If I can't sell the kit in a week or two I will be open to parting it out to the highest bidder.
*There are additional photos available on Photobucket so clicking on one of the pic should take you to the album.*
0
04-24-2014, 10:19 AM
#2
Newb
Join Date: May 2013
Posts: 44
Total Cats: -3
hey how many cc are the injectors?
0
04-24-2014, 10:24 AM
#3
Newb
Join Date: May 2013
Posts: 44
Total Cats: -3
i cant pm yet but im very interested, please shoot me a text 516-382-8639
0
04-26-2014, 04:29 PM
#5
Newb
Join Date: Dec 2013
Posts: 26
Total Cats: -14
are you selling as a whole kit or in pieces. interested in oil and water lines with all fittings
0
Thread
Thread Starter
Forum
Replies
Last Post
