FS: Koni/Eibach; Suspension bits, wing, engine
02-13-2011, 10:21 PM
#1
Newb
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Pickering, Ontario
Posts: 32
Total Cats: 1
FS: Koni/Eibach; Suspension bits, wing, engine
***SOLD*** Set of yellow Konis with Eibach springs - complete unit including top mounts, assembled and ready to install. These are off my 2002 NB: $350
***SOLD*** A set of Afco top shock mounts. these have spherical bearings (no rubber) so they are will be somewhat harsh on the street but great for autox. $60
Big *** wing. Originally had 2 motors to work as an air brake and to provide - driver-adjustable downforce via a movable rear flap This motor is missing: asking $100
(I'll find another motor and install the wing and wiring if you're interested.)
***SOLD*** NA engine in running condition: $300
***SOLD*** Energy bushings - new in bag for stock front and rear anti-roll bars $40
***SOLD*** A set of Afco top shock mounts. these have spherical bearings (no rubber) so they are will be somewhat harsh on the street but great for autox. $60
Big *** wing. Originally had 2 motors to work as an air brake and to provide - driver-adjustable downforce via a movable rear flap This motor is missing: asking $100
(I'll find another motor and install the wing and wiring if you're interested.)
***SOLD*** NA engine in running condition: $300
***SOLD*** Energy bushings - new in bag for stock front and rear anti-roll bars $40
Last edited by dynodragon; 02-22-2011 at 09:29 PM. Reason: update status
0
02-13-2011, 10:31 PM
#2
Senior Member
iTrader: (23)
Join Date: Oct 2009
Location: Chatsworth, SoCal
Posts: 948
Total Cats: 1
Interested in the swaybar bushings. How much shipped to Ca 90403? Also what are the spring rates for the eibach springs as I may be interested in the shocks and top hats.
Have a great day,
Jared
Have a great day,
Jared
0
02-13-2011, 11:11 PM
#3
Newb
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Pickering, Ontario
Posts: 32
Total Cats: 1
Here are the specs on the springs: (spring rate was calculated from the measured dimensions of the spring)
EibachRear: wire dia - .420 OD - 4.157 coils - 6 rate - 140 lb/in free length 10.5Front: wire dia - .470 OD - 4.225 coils - 6 rate - 212 lb/in free length 10.0
0
02-17-2011, 03:10 AM
#6
Junior Member
Join Date: Aug 2009
Posts: 186
Total Cats: 2
are the afco top mounts for front and rear, so 2 flat and 2 w/ recessed hat? if so do u know the ID of the spherical bearing?
0
02-21-2011, 04:25 PM
#7
Junior Member
Join Date: Jun 2009
Location: Simi Valley, CA
Posts: 52
Total Cats: 0
Do you know if the NB tophat + the yellows will fit a NA?
0
02-21-2011, 06:11 PM
#9
Junior Member
Join Date: Jun 2009
Location: Simi Valley, CA
Posts: 52
Total Cats: 0
0
02-21-2011, 07:28 PM
#10
Junior Member
Join Date: Jan 2011
Posts: 133
Total Cats: 0
how many miles are on the konis
0
02-21-2011, 09:42 PM
#11
Senior Member
iTrader: (23)
Join Date: Oct 2009
Location: Chatsworth, SoCal
Posts: 948
Total Cats: 1
I total 450 for the top hats shocks springs and rear sway bar bushings plus 100 for shipping. Please confirm amount and let me know where to send payment. I have money in paypal and will pay all fees. Thank you.
Have a great day,
Jared
Have a great day,
Jared
0
02-22-2011, 09:20 PM
#13
Newb
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Pickering, Ontario
Posts: 32
Total Cats: 1
Me. Made it for my 1986 MR2. It's been gathering dust for 4+ years. The picture of the MR2 shows the wing during development. The picture of the Miata is the completed design with faring and integrated rear brake light. Some of the internals are missing (relays and one of two motors) but could be replaced...
-Jo
-Jo
0
02-23-2011, 07:30 PM
#16
Junior Member
Join Date: Jun 2009
Location: Simi Valley, CA
Posts: 52
Total Cats: 0
If the spoiler is mahogany i may be interested.
0
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
