Turbo partout, megasquirt 2, sway bar, ID 1000's, coolant reroute, gauges, and more.
07-30-2012, 09:53 PM
#27
Senior Member
iTrader: (14)
Join Date: Aug 2008
Location: Tinley Park, IL
Posts: 1,482
Total Cats: 0
Your inbox is full. Was wondering how much you wanted for the ID 1000s? How long were they ran on the car, what model number are they and could you send some pics. Thanks, Jeff.
Reply
0
0
07-31-2012, 10:03 PM
#33
Junior Member
Thread Starter
iTrader: (2)
Join Date: Nov 2011
Location: Troy, Michigan
Posts: 252
Total Cats: 17
All PM's have been answered. I included an email address in my OP in case my PM box fills up again, and it probably will seeing as I'm limited to a measly 25 messages. :/ A link to all of the photos has been added to the OP as well.
I have the actuator that connects to the gas pedal and I have the dash switch. If you also need the stalk that's on the column, I suppose that we could trade stalks. Can you go more in depth on the other stuff? The cruise control was functional when I bought the car so I can probably come up with it.
I have the actuator that connects to the gas pedal and I have the dash switch. If you also need the stalk that's on the column, I suppose that we could trade stalks. Can you go more in depth on the other stuff? The cruise control was functional when I bought the car so I can probably come up with it.
Reply
0
0
07-31-2012, 11:04 PM
#35
Senior Member
iTrader: (7)
Join Date: Oct 2011
Location: Horse and Buggy, PA
Posts: 704
Total Cats: 21
There are 6 required components, and 3 small parts as follows: servo unit with accelerator cable attachment and vacuum hose; computer module; steering column clockspring/stalk assembly; brake switch; accelerator pedal assembly; main on-off switch; 2 retaining or "E" clips to secure the pedal assembly; 1 bushing which attaches to the accelerator pedal.
Reply
0
0
08-01-2012, 02:11 AM
#37
From the miata.net garage section
There are 6 required components, and 3 small parts as follows: servo unit with accelerator cable attachment and vacuum hose; computer module; steering column clockspring/stalk assembly; brake switch; accelerator pedal assembly; main on-off switch; 2 retaining or "E" clips to secure the pedal assembly; 1 bushing which attaches to the accelerator pedal.
There are 6 required components, and 3 small parts as follows: servo unit with accelerator cable attachment and vacuum hose; computer module; steering column clockspring/stalk assembly; brake switch; accelerator pedal assembly; main on-off switch; 2 retaining or "E" clips to secure the pedal assembly; 1 bushing which attaches to the accelerator pedal.
Reply
0
0
