MS Labs - Miata Accessories info@mslabs.gr - Custom Megasquirts for your miata

MS3 Basic Installation Help

 
Thread Tools
 
Search this Thread
 
Old 06-30-2014, 04:03 PM
  #1  
Junior Member
Thread Starter
 
780racer's Avatar
 
Join Date: Feb 2011
Posts: 98
Total Cats: 3
Default MS3 Basic Installation Help

So I'm sure there are like 2 million asking rev for help at any moment of the day. I don't expect immediate responses from him.

The question I have for everyone is, I have a IAT, EBC and want to hook up the LC-1 I have. I have been trying to search though here/Checked his official site, and used google.

I could not turn up anyone talking about this specifically, Idiot proof instructions (what I honestly need)

I mean I know I could just start hooking up wires to the included connector, But If this has a base map on it, I assume that it also means that these wires have pre tuned inputs/ports and MS will be looking for them to be hooked up correctly.

Picture included


I'm just trying to get my car to run/start tonight....

Edited because Idot.

I really want to thank anyone for looking/helping.

Ryan
Attached Thumbnails MS3 Basic Installation Help-10406381_10152243404893358_3810404417828294678_n_zpse92652b4.jpg  
780racer is offline  
Leave a poscat 0 Leave a negcat
Old 06-30-2014, 04:20 PM
  #2  
Elite Member
iTrader: (2)
 
Oscar's Avatar
 
Join Date: Jan 2007
Location: Bolton, UK
Posts: 3,022
Total Cats: 120
Default

Didn't you get a list for the db37 pinouts with your instructions? If not, shoot rev a message with your ecu serial number. Unless you didn't buy directly from him, try contacting the po.
Oscar is offline  
Leave a poscat 0 Leave a negcat
Old 06-30-2014, 04:25 PM
  #3  
Junior Member
Thread Starter
 
780racer's Avatar
 
Join Date: Feb 2011
Posts: 98
Total Cats: 3
Default

I purchased it directly from him (Rev). The only thing I got was a Test sheet displaying all of the tests the unit went through to make sure it was good to go. No instructions at all were included.

Serial number is 12242 As im sure Rev will see this or my PM.

So I am correct in thinking that i need instructions to correctly install this bad boy harness? I just wanted to make sure I am not a complete idiot....
780racer is offline  
Leave a poscat 0 Leave a negcat
Old 06-30-2014, 04:27 PM
  #4  
Retired Mech Design Engr
iTrader: (3)
 
DNMakinson's Avatar
 
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,009
Total Cats: 856
Default

Originally Posted by Oscar
Didn't you get a list for the db37 pinouts with your instructions? If not, shoot rev a message with your ecu serial number. Unless you didn't buy directly from him, try contacting the po.
Even if used, send Rev your S/N and he will send you the instructions and .ini.
DNMakinson is offline  
Leave a poscat 0 Leave a negcat
Old 06-30-2014, 04:32 PM
  #5  
Junior Member
Thread Starter
 
780racer's Avatar
 
Join Date: Feb 2011
Posts: 98
Total Cats: 3
Default

Well damn. I guess I am dead in the water till tomorrow. Thanks for the help anyways guys.
780racer is offline  
Leave a poscat 0 Leave a negcat
Old 06-30-2014, 04:47 PM
  #6  
Junior Member
Thread Starter
 
780racer's Avatar
 
Join Date: Feb 2011
Posts: 98
Total Cats: 3
Default

Nvm. Rev Has Risen from the grave of sleep/Outside life to get my instructions to me.

He is a seriously kickass gentleman.
780racer is offline  
Leave a poscat 0 Leave a negcat
Old 07-01-2014, 12:14 PM
  #7  
Senior Member
iTrader: (8)
 
joyrider's Avatar
 
Join Date: Oct 2010
Posts: 586
Total Cats: 4
Default

He really cares about his/her customers. So hows the car running now?
joyrider is offline  
Leave a poscat 0 Leave a negcat
Old 07-01-2014, 12:24 PM
  #8  
Elite Member
iTrader: (2)
 
thenuge26's Avatar
 
Join Date: Aug 2012
Location: Indianapolis
Posts: 3,267
Total Cats: 239
Default

Yeah Reverant never fails to astonish me with his responses despite being 6 hours ahead of me.
thenuge26 is offline  
Leave a poscat 0 Leave a negcat
Old 07-01-2014, 04:11 PM
  #9  
Junior Member
Thread Starter
 
780racer's Avatar
 
Join Date: Feb 2011
Posts: 98
Total Cats: 3
Default

Well its installed. I have a short clip but its rather stupid and just me all giddy since the car has been down for almost 2 months between the turbo install and the subsequent MS purchase.

Edited again. Fixed Idle hunting. Still have that weird noise in video happen at idle.

Edit:



If you notice at 10-14 seconds under my stupid *** voice you can hear the engine.... doing something... What is that, and how do I make it go away?

Last edited by 780racer; 07-01-2014 at 07:00 PM.
780racer is offline  
Leave a poscat 0 Leave a negcat
Old 12-24-2014, 07:35 PM
  #10  
Newb
 
rayvone's Avatar
 
Join Date: Aug 2014
Posts: 1
Total Cats: 0
Default

Mine does the same!

Did you get to the bottom of it 780?
rayvone is offline  
Leave a poscat 0 Leave a negcat
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nick470
MEGAsquirt
7
06-16-2017 01:53 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
Rick02R
WTB
3
01-03-2016 07:18 PM
tazswing
Race Prep
20
10-03-2015 11:04 AM
lsc224
Miata parts for sale/trade
2
10-01-2015 09:17 AM



Quick Reply: MS3 Basic Installation Help



All times are GMT -4. The time now is 12:07 AM.