MS Labs - Miata Accessories info@mslabs.gr - Custom Megasquirts for your miata

Which pin controls fan? I have 2 conflicting settings on rev's base tune

 
Thread Tools
 
Search this Thread
 
Old 09-14-2016, 08:08 PM
  #1  
Junior Member
Thread Starter
 
Fatvod's Avatar
 
Join Date: Dec 2013
Posts: 54
Total Cats: -3
Default Which pin controls fan? I have 2 conflicting settings on rev's base tune

Hey folks. Im running the base tune that reverent provided to me. I have a ms3 basic and a 1992 1.6 miata. I havnt had any fan problems, it seems to work fine. But I noticed the other day, in my programmable outputs menu that I had what looks to be a fan control.

Shown here:


I ALSO have the normal fan settings setup in the normal fan control menu.

Shown here:



Notice how one has output Inj G, and one has Inj E. Im just wondering which output is the correct one for my ECU?

I also was wondering which pin is used for the CEL? Mine isnt setup with an output programmed.

Thanks guys!!!!

Last edited by Fatvod; 09-14-2016 at 08:19 PM.
Fatvod is offline  
Leave a poscat 0 Leave a negcat
Old 09-15-2016, 01:08 AM
  #2  
Retired Mech Design Engr
iTrader: (3)
 
DNMakinson's Avatar
 
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,009
Total Cats: 856
Default

You have 2 fans. They are controlled separately.

Your first screen shot:
The right one always comes on with the A/C, if you have it. However, it can also be controlled via PA6 to come on based on Coolant Temperature.

Your second screen shot:
The left fan is the main one. It is controlled with the FAN CONTROL. Notice that this main fan is set to come on at a lower temperature than the A/C fan. Note that TS also has the ability to set it to come on with the A/C, but your's is greyed out. I don't know why that is.

Maybe you don't have A/C. My answer does indeed apply to my '99, with A/C.
DNMakinson is offline  
Leave a poscat 0 Leave a negcat
Old 09-15-2016, 04:08 AM
  #3  
Elite Member
iTrader: (10)
 
Reverant's Avatar
 
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,976
Total Cats: 355
Default

InjE is for the cooling fan, InjG is for the condenser fan in case you want to also trigger it from the ECU (on the stock 90-93 wiring it only comes on with the A/C).
Reverant is offline  
Leave a poscat 0 Leave a negcat
Old 09-15-2016, 06:48 AM
  #4  
Boost Czar
iTrader: (62)
 
Braineack's Avatar
 
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
Default

He says he has a '92 so wouldn't that also be turning on the a/c compressor at the same time on a 1.6L? 90-93s don't have separate relays for the a/c compressor and a/c fan...
Braineack is offline  
Leave a poscat 0 Leave a negcat
Old 09-15-2016, 09:00 AM
  #5  
Elite Member
iTrader: (10)
 
Reverant's Avatar
 
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,976
Total Cats: 355
Default

Originally Posted by Braineack
He says he has a '92 so wouldn't that also be turning on the a/c compressor at the same time on a 1.6L? 90-93s don't have separate relays for the a/c compressor and a/c fan...
No, on the 9093-9495 model, InjG pulls pin 4S low, so since there's nothing there on the 90-93 harness, it does nothing. But if you were to add a relay and wire the 85 or 86 terminal to pin 4S, it will activate the relay and activate the fan.
Reverant is offline  
Leave a poscat 0 Leave a negcat
Old 09-15-2016, 10:07 AM
  #6  
Boost Czar
iTrader: (62)
 
Braineack's Avatar
 
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
Default

gotcha. I see what youre saying.
Braineack is offline  
Leave a poscat 0 Leave a negcat
Old 09-15-2016, 09:02 PM
  #7  
Junior Member
Thread Starter
 
Fatvod's Avatar
 
Join Date: Dec 2013
Posts: 54
Total Cats: -3
Default

Thanks guys for the follow up! I do have A/C but it doesnt really work. If it ever did, I cant say, as I dont generally use it.
Fatvod is offline  
Leave a poscat 0 Leave a negcat
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Carloverx
MEGAsquirt
12
02-16-2019 10:13 PM
Goingnowherefast
Race Prep
11
09-26-2016 10:34 PM
2seatclique
MEGAsquirt
12
08-09-2016 12:32 PM
rx7autoxer
Miata parts for sale/trade
9
08-08-2016 08:37 PM
ihiryu
WTB
4
08-04-2016 10:16 AM



Quick Reply: Which pin controls fan? I have 2 conflicting settings on rev's base tune



All times are GMT -4. The time now is 11:05 PM.