Cold Accel Enrichment?....start issues
#1
Junior Member
Thread Starter
Join Date: Oct 2004
Location: Windsor, Canada
Posts: 191
Total Cats: -2
Cold Accel Enrichment?....start issues
Seems I have my VE table, AFR, and ignition tables all running well now. The only problem I have is my cold start. I've run the cold start VE analyzer and that seems dialed in, but its the initial startup. I usually have to pump the gas pedal to get the car started where as OEM would start with no throttle applied. I'm just wonder if I need to adjust my Cold Accel Enrichment in the Accel Enrichment wizard? I have bigger injectors (310cc with FPR...from my old Emanage setup) and my Req_fuel has been adjusted. Wondering if I'm missing something. I'm sure my lightened flywheel doesn't help either.
#2
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
if you have to pump the pedal, then you have too much fuel during cranking.
i like tuning cold starts by reducing the cranking table significantly and adding fuel until it starts at that particular coolant temp.
CAE has nothing to do with cranking or warmup.
i like tuning cold starts by reducing the cranking table significantly and adding fuel until it starts at that particular coolant temp.
CAE has nothing to do with cranking or warmup.
Thread
Thread Starter
Forum
Replies
Last Post
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM