MSPNP MSPNP specific Megasquirt related discussion.

MSPNP1 Serial Cable DIN Pinout. Need Help.

Thread Tools
 
Search this Thread
 
Old 05-09-2013, 11:45 PM
  #1  
Newb
Thread Starter
 
Celsior's Avatar
 
Join Date: Apr 2012
Posts: 5
Total Cats: 0
Default MSPNP1 Serial Cable DIN Pinout. Need Help.

Hi everyone.

I have not yet needed to ask a question though out my entire megasquirt install. which involved installing a PNP9697 into my 90 with a 94 1.8litre.

But I am now stumped with this small issue.

All was going well and had the car fairly well tuned. Until my girlfriend yanked on the Serial cable into my laptop pulling the wires from the connector on the DB9 (computer end) of the cable.

I have searches for a few days and cant find any info.on the 4 pin connector socket on my megasquirt. Once I know the fuction.of these pins I can resolder the plug.

Which is RX which is TX??

Open the case there are four wires connected to the socket.

Red. Blue. Yellow. Green.

I have worked out Blue is ground.

Im guessing yellow and green are rx tx ( recieve and transmit data )

But im not sure.

I have tried

Blue to DB pin 5 ground.

Yellow to DB pin 2 RX

Green to pin 3 TX

red to DB pin 9 - no fuction.

However no connection.

This isnt a connection issue with settings and port numbers

I simply have my serial cable.wired.wrong.

Can some one please help.

A continuity test would be a simple answer.

or even a picture of the db 9 with the claim.shell.removed
. mind you these wire colors are different but may still help me.

Thanks in advance

David
Celsior is offline  
Old 05-10-2013, 12:32 AM
  #2  
Newb
Thread Starter
 
Celsior's Avatar
 
Join Date: Apr 2012
Posts: 5
Total Cats: 0
Default

p.s.

Even someone could measure the voltages from ground to pins 2 and 3 on their db9 plug on the seial cable.when plugged into the megasquirt but not the laptop.

I currently have.

8 volts DC on pin 2

and 5 Volts on pin 3

Im not sure what I should be seeing here.

If anyone needs any advice on changing ecu year models I can assist.



Please help me. My car is running lean judging from the plugs having white tips so I have no.way of.telling afr.
Celsior is offline  
Old 05-10-2013, 08:16 AM
  #3  
Newb
Thread Starter
 
Celsior's Avatar
 
Join Date: Apr 2012
Posts: 5
Total Cats: 0
Default

I worked it out.

The pinout is as follows.

Color of wire.that connects to the rear of the 4 pin mini din plug connector
inside the ecu case. MPNP1 only.

Red wire - TX to DB pin 3.

Blue wire - ground - db pin 5

green wire - 5v supply for bluetooth. db pin 9

Yellow - RX. db pin2.

thanks

Dave
Celsior is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM
nick470
MEGAsquirt
1
09-30-2015 10:32 PM
shooterschmidty
Engine Performance
8
09-30-2015 10:28 PM
btabor
ECUs and Tuning
10
09-28-2015 05:33 PM



Quick Reply: MSPNP1 Serial Cable DIN Pinout. Need Help.



All times are GMT -4. The time now is 01:29 PM.