Prefabbed Turbo Kits A place to discuss prefabricated turbo kits on the market

Get An Exhaust!

Thread Tools
 
Search this Thread
 
Old 03-20-2007, 04:42 PM
  #1  
Senior Member
Thread Starter
iTrader: (1)
 
miataspeed1point6's Avatar
 
Join Date: Feb 2006
Location: Detroit
Posts: 1,234
Total Cats: 0
Default Get An Exhaust!

I put in a test pipe with a resonator that ends before the rear wheels. I plan to use this for any track time or autocrossing, so obviously it is WAY too loud for the street. I was just curious on how it sounded.

The horsepower gain was incredible! I took out my emanage so I could see realistically how much gain there was, so this is on a stock greddy kit. I drove off at 2,000RPM in first gear and floored it, once the boost kicked it the tires started slipping. I'm 100% sold on the cost of a large downpipe. It has to be the best bang for the buck besides the turbo itself. If you have a greddy kit and want more power, get an exhaust.

I know people have said this before, but I wanted to feel it for myself. I can't wait to make my downpipe and put on an exhaust I can use for the street.

EDIT: I had a stock exhaust on before I swapped it out.
miataspeed1point6 is offline  
Old 03-20-2007, 05:22 PM
  #2  
Junior Member
iTrader: (2)
 
TwoScoopsofHooah's Avatar
 
Join Date: Aug 2006
Location: Louisville Kentucky
Posts: 222
Total Cats: 0
Default

I have no experience with the Greddy Kit but.... a buddy of mine that is on the board had that joke of a downpipe that the greddy comes with....and swapped it out...it helped so much.. with a stock rx7 I'd pull hard till he hit boost(takes for ever with factory Greddy DP) the spool characteristics are amazing with a better flowing downpipe. I'm glad you're happy with your purchases!

Keep boosting brother!
TwoScoopsofHooah is offline  
Old 03-20-2007, 05:28 PM
  #3  
Junior Member
iTrader: (2)
 
rappadan's Avatar
 
Join Date: Jul 2006
Posts: 482
Total Cats: 0
Default

i've always had the tony dp, but when i upgraded from 2.25" resonator and muffler to 2.5" and only a resonator. it just boosts and pulls harder than ever! A free flowing exhaust is one of the best things to do first after installing a turbo.
rappadan is offline  
Old 03-20-2007, 05:32 PM
  #4  
Junior Member
iTrader: (1)
 
JDMAflac's Avatar
 
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 466
Total Cats: 0
Default

Looks like i'll by upgrading my OBX N.A. exhaust for a 2.5 one then =D
JDMAflac is offline  
Old 03-20-2007, 06:38 PM
  #5  
Guest
iTrader: (1)
 
ray_sir_6's Avatar
 
Join Date: Dec 2006
Location: DFW, TX
Posts: 714
Total Cats: 0
Default

I concern. The difference between the stock kit on stock exhaust and having a turbotony DP with 2.5" cherrybomb muffler and pipe (6" of it) is like doing the turbo kit all over again. It's nice having boost at 3k instead of 4.5k.

I actually went from 4-5 cars to only 2 cars behind a WRX (Stage 2 tune, 3" DP and exhaust) and EVO8 (w/intake). This was from a 20-80 roll, and 40-110 roll. Should have been closer, but losing boost during shifts (no BOV) sucks.
ray_sir_6 is offline  
Old 03-20-2007, 08:28 PM
  #6  
Senior Member
Thread Starter
iTrader: (1)
 
miataspeed1point6's Avatar
 
Join Date: Feb 2006
Location: Detroit
Posts: 1,234
Total Cats: 0
Default

I put the emanage back in and went for a ride. I am in LOVE! If the drone wasn't so bad I would keep it. I sware it has 300 horses...but then again I have been driving an 75hp 88 accord for the last 6 months...

93 Miata + Greddy + Emanage (and Autotune) + shorty exhaust = HELL yes!

Now if only I didn't have a 6 inch, the clutch didn't slip above 5k and I knew it had a reliable tune...I would be in heaven.

EDIT(Damn why so many?): I know it only has 140-150, I was being sarcastic. I just noticed I didn't make it sound that way...but now my avatar reflects my cars new personality!

Last edited by miataspeed1point6; 03-20-2007 at 10:22 PM.
miataspeed1point6 is offline  
Old 04-05-2007, 12:01 AM
  #7  
Junior Member
 
mcsinc's Avatar
 
Join Date: May 2005
Location: Kelowna, BC, Canada
Posts: 133
Total Cats: 0
Default

Here's my experience: I bought an FM 2.5" turbo dual and had a 2.5" midpipe made, so it's 2.5" all the way through now, vs. my old setup of 2.25" BSP midpipe/duals. It made quite a noticeable SOTP difference. THEN, during some autocross racing, the pipe became disconnected at the exhaust manifold-pipe flange (muffler shop didn't tighten enough)...so it was extra LOUD, but had wayyyy more power. We had some R compounds on at the time and it pulled like there was no tomorrow. But, all good things come to an end...
mcsinc is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Full_Tilt_Boogie
Build Threads
84
04-12-2021 04:21 PM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
Corky Bell
Prefabbed Turbo Kits
18
11-22-2016 09:01 PM
Big_gumby
Meet and Greet
80
10-05-2015 04:06 PM
Goldwar
DIY Turbo Discussion
2
09-29-2015 09:20 AM



Quick Reply: Get An Exhaust!



All times are GMT -4. The time now is 01:07 AM.