LunaticDriver

so I emailed a online bolt shop about new bolts and this is what I got back.

"on the Stud 8x1.25 - what length did you need"

I sent them the thing that someone else posted that looked like this

"Hi everyone,

Thought I'd like to share this.. It's a good (very good) idea to upgrade the bolts that come with the GReddy Kit:


Turbo to Manifold: (FM Part numbers)
4 of - Stud 8x1.25 (36-10331)
4 of - Lock Nut 8x1.25 (36-20120)
4 of - Washer, SS 8mm (36-30130)"

so the question is on those Stud's what is the length?

kung fu jesus

iTrader: (1)

35-40mm

LunaticDriver

Is one better or does it really matter?

Arkmage

iTrader: (3)

you can always cut the 40mm down if it's too long....

www.boltdepot.com is also a great place for fasteners, they have some really hard to find ones too.

Newbsauce

iTrader: (2)

Good question.. as I was about to get these bolts, maybe this will help you.. The greddy manual has the hardware listed as:

8mm x 25 mm (for turbine exhaust side) - 4
8 x 35 for muffler adapter- 4
6 x 15 for oil return - 2
10 x 35 for muffler front pipe - 3
8 mm lock washers - 8
6 mm lock washers - 6
10 mm lock washers - 10
Nut - 10mm - 3