opinion on the last few peices of my build..
08-20-2007, 08:30 PM
#1
Elite Member
Thread Starter
iTrader: (13)
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,603
Total Cats: 564
opinion on the last few peices of my build..
Alright, so i actually have income again and im going to finish the miata..
My current specs are a greddy kit, FMIC, 1.8l injectors, bipes ACU. Im going to be buying a walbro 190hp fp, a easier-to-tune-with FMU(screw the vortec), a wideband, downpipe, 02 clamp, and a clutch.
Is there anything im missing to tune for and run around 8-10 psi? Im pretty sure i can tune everything myself via the wideband display..
Hopefully i can run around 200rwhp..
Opinions/advice welcome!
Edit: what about an rx-7 AFM?!?
My current specs are a greddy kit, FMIC, 1.8l injectors, bipes ACU. Im going to be buying a walbro 190hp fp, a easier-to-tune-with FMU(screw the vortec), a wideband, downpipe, 02 clamp, and a clutch.
Is there anything im missing to tune for and run around 8-10 psi? Im pretty sure i can tune everything myself via the wideband display..
Hopefully i can run around 200rwhp..
Opinions/advice welcome!
Edit: what about an rx-7 AFM?!?
Last edited by Fireindc; 08-20-2007 at 08:43 PM.
Reply
0
0
08-21-2007, 12:25 PM
#2
Junior Member
Join Date: May 2005
Location: Boston, MA
Posts: 73
Total Cats: 0
You'll need a boost controller to run anything higher than 6 or 7 PSI which is the limit for tightening the wastegate rod. Youll also want to probably add in an intercooler if you plan on running towards the upper limit of your target of 10PSI.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
