Oil Cooler Installation Issue - Any Ideas?
#1
Oil Cooler Installation Issue - Any Ideas?
I am trying to install the Flyin' Miata oil cooler on a Miata that has the older Bell IC set up. The pipe gets in the way of where the Oil Cooler needs to be installed. Has anyone run into this issue? Does any one know of an oil cooler that will work. I need to find a solution quick. The car is on my mechanic's lift!
#7
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,652
Total Cats: 3,011
In front of the intercooler.
Behind the intercooler.
Above the intercooler.
Beside the intercooler.
or
any of the above locations mounted standing on its side (provided that the oil is coming in at the bottom and going out at the top).
All you need is scrap metal, tin snips or some other cutting device, and a drill for mounting holes. The limit is your imagination.
Behind the intercooler.
Above the intercooler.
Beside the intercooler.
or
any of the above locations mounted standing on its side (provided that the oil is coming in at the bottom and going out at the top).
All you need is scrap metal, tin snips or some other cutting device, and a drill for mounting holes. The limit is your imagination.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM