HKS 300zx Wastegate Actuator
02-28-2008, 05:32 PM
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2005
Location: San Jose
Posts: 213
Total Cats: 0
HKS 300zx Wastegate Actuator
Hey guys,
I found some HKS 300zx wastegate actuators on Amazon for $170 a pair. The description says 10-15psi. Does that mean the lowest possible boost is 10 even with a boost controller?
http://www.amazon.com/HKS-1430-RN002...4237818&sr=8-1
Thanks,
t.t.
I found some HKS 300zx wastegate actuators on Amazon for $170 a pair. The description says 10-15psi. Does that mean the lowest possible boost is 10 even with a boost controller?
http://www.amazon.com/HKS-1430-RN002...4237818&sr=8-1
Thanks,
t.t.
Reply
0
0
02-28-2008, 06:06 PM
#3
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2005
Location: San Jose
Posts: 213
Total Cats: 0
Well braineck suggested replacing the Greddy actuator and used a 300zx twin turbo as an example. $170 for 2 brand new actuators isn't bad plus they're made by HKS so the quality should be pretty good.
Reply
0
0
02-28-2008, 07:39 PM
#4
Elite Member
iTrader: (13)
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,598
Total Cats: 561
Yes indeed, lowest boost on those is going to be 10, still might want to use a mbc to keep spoolup quick.
On a side note let me know if you buy two of them, i might take one off your hands.
On a side note let me know if you buy two of them, i might take one off your hands.
Reply
0
0
02-28-2008, 07:45 PM
#5
you can use a spring to pretension the actuator and therefore run less psi
04-12-06_1409.jpg
(images and information is property of magnamx5)
04-12-06_1409.jpg
(images and information is property of magnamx5)
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
