thirdgen

iTrader: (26)

Does Chuck Norris have you on speed dial?!? You'd wipe your *** with c6 ZO's all day! **** would make like 530whp with a slight 28* timing advance.

triple88a

iTrader: (2)

Gotta tune the noss another mili second and you'll run 9s.

NA4Life

Naw its a street car just a hard dog roll bar

18psi

iTrader: (76)

better throw some carbon kevlar brakes on dat dere bad boy den cuz u wont be able to stop after 180mph pullz

triple88a

iTrader: (2)

What do you plan on doing for fuel? Power card and a 5th injector or what?

thirdgen

iTrader: (26)

Why would he need that? That's all bs. Octane booster is all he would need.

18psi

iTrader: (76)

fuel pressure regulator bro

you know this

bump base pressure to 180psi and keep the stock injectors, they're good for around 550-560 depending on how clean they are

thirdgen

iTrader: (26)

Oh **** son, I forgot about fuel pressure. Good call!!

NA4Life

What would you suggest?

Fireindc

iTrader: (13)

standalone fuel management and a motec systems exhaust

NA4Life

Could it work with just a adjustable fuel pressure regulator rather then spending $800 on a standalone fuel management system?

carnut169

Just why.

Ebay= crap kits & blown motors. Manifold will crack. Go to Flyin Miata or Begi for a decent bolt-up kit.
250hp is the max your internals can take, but you will need to spend $$ on a clutch, and EMS of some sort.

I think the lowest $$ you can spend and have something decent is $3k.

Everyone knows this but OP, your lazy and didn't do ANY reading.

fooger03

iTrader: (2)

ILOVETACOTACO Manifold is DEFINITELY NOT a waist of money.

Here's a waist of money:

Erat

iTrader: (5)

I love tacos.

If you don't love tacos you must be some type of communist.

BTMiata

iTrader: (5)

I would buy nething wit taco in its name. Yo seriously I ran this manif0ld before i hit up artech for my new setup and honestly I think i made more boost wit the taco. **** gave me the squirts when i got in boost it was mad crazy

mlev

iTrader: (5)

This made me lol so hard.

NA4Life

But that manifold is made cheap and has a high risk of cracking its only stainless steel can it take the heat and not crack?

18psi

iTrader: (76)

yes. but worst case just carry a gallon of water with you and throw it on the manifold after a hard pull to cool it off real quick dawg

Chiburbian

iTrader: (1)

Please make it stop.

locomonkeyboricua

I know that one of the fastest stock motor miata on mt.net has a ebay turbo. So yes people hate on ebay parts because many parts suck. Used turbo kits for sale here are always a better buy. But try it out and be smart about the tune and you might have a fun 200whp miata with not much coin. This site is full of good info once you read a bunch..