MSM turbo bracket
#1
MSM turbo bracket
Hello, question for you:
I just ended the project of my friend's car with MSM turbocharger fitted onto a standard 1.8L Miata with very good results (logs and dyno incoming, but 10 psi from 2k rpm to 6000 rpm is definitely good for our target!).
Now another italian guy is trying to use the same way. Unfortunately in the kit he bought, turbo bracket was missing.
Do anyone of you has it in his hands and can pick me some dimensions? It's a bit tricky to replicate it w/o disassembling too many things on the "already-on-street" car or trying to access for measurements in that area on the WIP car.
Thanks in advance
I just ended the project of my friend's car with MSM turbocharger fitted onto a standard 1.8L Miata with very good results (logs and dyno incoming, but 10 psi from 2k rpm to 6000 rpm is definitely good for our target!).
Now another italian guy is trying to use the same way. Unfortunately in the kit he bought, turbo bracket was missing.
Do anyone of you has it in his hands and can pick me some dimensions? It's a bit tricky to replicate it w/o disassembling too many things on the "already-on-street" car or trying to access for measurements in that area on the WIP car.
Thanks in advance
#4
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
I think I saw one somewhere that someone fabbed out of a piece of tube and a pair of heim joints with a couple of jamb nuts so it was adjustable. Would probably make it a lot easier to get the alternator bolts and the oil filter.
I believe some guys even run without it...
I believe some guys even run without it...
Thread
Thread Starter
Forum
Replies
Last Post