yada

iTrader: (1)

Anybody know where I can find just the turbo from the greddy kit?

Slidin'Miata916

iTrader: (-1)

you can either search the for sale ads on here, post a wtb td04h 15g turbo, or you can have luck with ebay.
Good luck.

yada

iTrader: (1)

Ah that sux I was hoping to find a place to get a new one. Any other turbos suggestions that would work 100% with the greddy kit? As long as its t25 or 28 it should work, correct? Thnks for helping

Slidin'Miata916

iTrader: (-1)

I dont think the T25 or 28 will work with the greddy kit. But maybe someone else can comment on that. And try calling greddy.

yada

iTrader: (1)

How would a t3t4 do on the 1.6? Im either gonna buy the greddy and upgrade it, or do a DIY t3t4. Its gonna be a lil before I turbo so plenty of time to decide. Just doin some research.

Ben

iTrader: (33)

Why, do you already have a greddy mani or something? The mani is a T25 flange, so there are plenty of options. However, <1> the greddy turbo position is pretty high in the engine compartment so I would think a large T25/28 might have some clearance problems with the hood but a smaller turbo looks like it would be ok. <2> you'll need to fab your own downpipe, which is fine as the greddy one sux ballz anyway.

There are a world of "t3/t4" turbos out there. You'll need to be more specific. But they're probably all on the large side for a stock 1.6. A T3S60 would be a good T3 footprint turbo for good spool without much of a power compromise.

B

yada

iTrader: (1)

My plan is to get the tubular mani from etd, the DP from racingmazda, and either the mx5 projects IC or the trackdogracing IC and a MSpnp. After all that the only thing that would be used from the greddy kit would be the turbo itself pretty much. Just trying to avoid spending the extra 1200 on the full kit if I can just get the turbo itself somewhere.

yada

iTrader: (1)

New question. What all turbos will bolt on to the greddy manifold? or is it just any t25? And which would you guys recomend?

Srry if im bein a pest.

Ben

iTrader: (33)

You're not being a pest, but you are kind of missing it.

Go to:
http://www.bellengineering.net/Pages...ata_parts.html

With the same budget you can get your parts from there, get better stuff, and pretty much pick whatever turbo you want. T25, T28, T3. New, Used, Garrett, Chinese, whatever.