nmwisima

Hello,

I m new, my name is Achilleas from Greece.

I recently bought a used HKS turbo kit for 1.6 Miata

Anyone had experience with the above mentioned kit?

Does the kit fit a 1.8 engine (friend wants to know)?

Is the F-CON Mini included in the kit allready programmed?
Is it re-programable? Where can I find an installation manual?

Thank you in advance.

I include some pics of the kit.











And some extras

Toddcod

iTrader: (8)

I don't know anything about the F-con. Try google search???? You might can find a forum that is familar to them. ( Is that made by greddy? You can get help online through their website if it is GReddy.)

As far as differances between the 1.6 liter and the 1.8. The manifolds are different. And there are a few diferances between the the years on 1.8 liter setup's.

A post that will answer alot of questions is https://www.miataturbo.net/forum/showthread.php?t=4288

GOOD LUCK! And Welcome to the DARSIDE.......!

KPLAFIN

iTrader: (1)

The f-con is made by HKS....see that big HKS printed right above the "f-con" on the unit he's holding? I don't know much about these either, and I doubt many on this forum will given we're all about Megasquirt.

Like Toddcod said you will need another manifold and also a downpipe to make this work with a 1.8L motor. You didn't get an intercooler with the kit?

nmwisima

Thanx for the answers.

No, kit doesnt come with i/c. I ll have one custom made.

Well, all I know about the F-Con is that you can tune fuel +/-16% and advance +/-4 degrees.

I dont know if its allready tuned for the car (it has the specs on a sticker on it, writing NA6) and I dont know if/how I can change its program.

Ryhn

Loot at here maybe can help you.
http://www.fd3s.net/fcon_install.html

And if you are planing to sell some parts from that kit let me know.

Toddcod

iTrader: (8)

This computer must be blocking the pictures. All I see is things that say greddy on them. LOL

jipznet

I've got the same problem, I'm looking for the installation manual of HKS FCON mini
please help ....

zoom2zoom

iTrader: (5)

The f-con Mini is a very basic fuel piggyback, I had one on my first turbo Miata and it was rock solid with 6psi. I might be able to find a wiring reference. Get me a better picture of the wires and I will look into it. Mine was from the early 90's and not sure if the wiring changed much.

nmwisima

I ll do that. Thank you.

jipznet

my fcon

zoom2zoom

iTrader: (5)

Dude, you need to resize your pictures, it won't even fit on my screen!! But mine uses 8 wires and I will look at it tomorrow to see if they are all the same.

jipznet

thanks buddy. wait for your good news.

jipznet

any news ?

nmwisima

Anybody knows something about how is that F-Con thing connected to the OEM ECU???

Saml01

iTrader: (9)

Call up HKS, ask them for a wiring diagram if the dude you bought it from didnt give you one or try the HKS site. To answer your other question, if it came with the kit you bought its probably ready to go. Googling shows that you can get new ROM chips for it and nothing else.

nmwisima

Thanx!

Ajb

The person i bought mine off said you had to retard the base timing a few degrees. Not sure if this is true or not?

dustinb

That could be true, depending on what your timing is set at right now. Going by the post higher up that said it would do +/- 4 degrees of timing, this would put it at 6 degrees if you were at the factory 10 degree mark. But since a bunch of people go to 14, you'd probably have some issues.

Ajb

I have found a partial wiring instruction for the ecu. My question is does it wire directly to the wires(cut to ecu) or does it just splice into them and share with the ecu ?

jipznet

difficult to say cut it or splice it,
for example, airflow signal almost cut it and connect to IN and OUT of the external ECU,
but RPM and electric +/- signal almost splice into the orignal wires.