Mounting plates for stock seat rails
#1
Mounting plates for stock seat rails
We were installing a aluminum Kirkey seat in my Dads car this weekend getting it all buttoned up for Texas Miata Challange. We cut out a plate to mount the seat to the factory rails. Anyways it turned out so good I had him cut some extras. I put them up on ebay with my cost only as the min bid. Here are the links.
http://cgi.ebay.com/ebaymotors/ws/eB...STRK:MESELX:IT
http://cgi.ebay.com/ebaymotors/ws/eB...STRK:MESELX:IT
Not trying to step on any vendors toes, but I don't think anyone makes a universal mount for the factory sliders. Hope this helps some of you guys out. Posted this in the race section due to the topic. If you have any suggestions or alternate parts that could be cut let me know and I'll try and talk pops into cutting them at cost.
Jake
http://cgi.ebay.com/ebaymotors/ws/eB...STRK:MESELX:IT
http://cgi.ebay.com/ebaymotors/ws/eB...STRK:MESELX:IT
Not trying to step on any vendors toes, but I don't think anyone makes a universal mount for the factory sliders. Hope this helps some of you guys out. Posted this in the race section due to the topic. If you have any suggestions or alternate parts that could be cut let me know and I'll try and talk pops into cutting them at cost.
Jake
#13
We are checking to see if the pass side is the same or if we need to cut a different plate. I'm in meetings all day but should have an answer tonight. This plate is a good solution to get a do it yourselfer 90% of the way to mounting a seat. No idea how other seats mount other than aluminum race seats, its up to you to make any brackets or drill any holes needed.
#14
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,488
Total Cats: 4,076
I did my driver side and it was kinda a PITA. basically I cut out 4 squares. bolted each square a corner of the stock rails, then fit the seat to the plates. it worked, but it took a loot of effort aligning ****. this plate would make my life easy.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM