Car is finished
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Location: Chattanooga, Tn
Posts: 1,234
Total Cats: 283
Car is finished
I just wanted to show off a couple pics of the car now that it is finished. It's all loaded up on the trailer and ready for Dixie. These pics were taken at a local Test N Tune event this last weekend.
And it looked like there was a decent chance of rain so I ordered some of the new Hoosier H20 Wets. Here is a pic of an unmounted 225 45 15 H2O wet beside an unmounted 275 35 15 A6. I run the A6's on 15x10 6ULs and tomorrow am mounting the "Wets" on the old 15x9 6ULs. Pretty surprised at how wide they are.
And it looked like there was a decent chance of rain so I ordered some of the new Hoosier H20 Wets. Here is a pic of an unmounted 225 45 15 H2O wet beside an unmounted 275 35 15 A6. I run the A6's on 15x10 6ULs and tomorrow am mounting the "Wets" on the old 15x9 6ULs. Pretty surprised at how wide they are.
#8
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2011
Location: Chattanooga, Tn
Posts: 1,234
Total Cats: 283
The wing is an older wing from this company.
http://www.cirodesignracing.com/Ciro...cing/HOME.html
It's just barely inside the rules for SSM. About 1/4" too short, 1/4" too narrow. ETC. Big enough to work but just small enough to be legal. And I added a gurney flap to the top element and rebuilt the end plates from Alumalite
http://www.cirodesignracing.com/Ciro...cing/HOME.html
It's just barely inside the rules for SSM. About 1/4" too short, 1/4" too narrow. ETC. Big enough to work but just small enough to be legal. And I added a gurney flap to the top element and rebuilt the end plates from Alumalite