Swapping NA and NB susspension components
#1
Swapping NA and NB susspension components
I just picked up a 99 NB to replace my 90 NA miata and i wanted to see if anyone knew if my aftermarket NA suspension parts will fit on my NB and vis-versa.
Flyin Miata stage 2 suspension with ground control coilovers & AGX adjustable dampers
Flyin Miata front and rear sway bars
Also have a PWR radiator i wanted to move over.
Thanks in advance guys
Flyin Miata stage 2 suspension with ground control coilovers & AGX adjustable dampers
Flyin Miata front and rear sway bars
Also have a PWR radiator i wanted to move over.
Thanks in advance guys
#6
Talked to Keith at Flyin Miata (awesome guy with great customer service)
This is going to get confusing:
NB coilovers will go to a NA miata with no issues.
NA coilovers will not easily convert to a NB. The ride height on NB with NA suspension will be around 1" lower than the NA with the same suspension.
The sway bars from the NA should work with end-links but the angle of the sway bars differs between the two models thus changing the leverage of the bars and thus effecting the over all function.
Radiator mounting points are different between the two so i will just make my own mounts.
Hope this helps someone down the line.
This is going to get confusing:
NB coilovers will go to a NA miata with no issues.
NA coilovers will not easily convert to a NB. The ride height on NB with NA suspension will be around 1" lower than the NA with the same suspension.
The sway bars from the NA should work with end-links but the angle of the sway bars differs between the two models thus changing the leverage of the bars and thus effecting the over all function.
Radiator mounting points are different between the two so i will just make my own mounts.
Hope this helps someone down the line.
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM