jeff_man

iTrader: (7)

do i need it for anything other then the obd2? i know the car will run without it.

if removed where should i relocate/tap in my cigarette lighter and tap 12v for gauges?

curly

iTrader: (25)

How is this race related? Removing for a race car?

I cut mine down the the bare essentials, leaving in the blower controls, mirrors, and gauges. The sound system and what ever else I took out was roughly half the weight, although it wasn't large to begin with. This is on my '93.

wayne_curr

iTrader: (8)

Any idea how much weight you saved? Ounces or pounds? Wires are heavy but i'm just not sure how much is under there.

Stein

iTrader: (46)

From those that have carefully stripped a harness for a Locost build, 24 lbs is not unreasonable.

jeff_man

iTrader: (7)

it's part of a track build and pulling a harness is not something you would do on a road car?

on a 99 gauges are part of main the harness that's on the firewall, the NAs have the gauges as part of the dash harness

i don't have a blower and plan on getting some light weigh mirrors or non power.


the harness i pulled was latest 5lbs, know johnwags pulled ~25 by removing every wire he didn't need from all his harnesses.

curly

iTrader: (25)

My entire dash project, including cutting off the bottom half, saved me roughly 20-25lbs.

chpmnsws6

iTrader: (12)

I can believe it. I have a trash bag sized container filled with unused wiring.