FS: Megasquirt parts- MS2 CPU/daugterboard, MS1 CPU, case for MS1/2 v3 board
09-26-2011, 01:57 AM
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Jan 2008
Location: Falls Church, VA
Posts: 1,361
Total Cats: 17
FS: Megasquirt parts- MS2 CPU/daugterboard, MS1 CPU, case for MS1/2 v3 board
I upgraded to MS3 a while ago and have a few parts from previous versions that I no longer need.
MS1 CPU, worked perfectly prior to removal for MS2 upgrade. Good for a spare or to replace the one you somehow managed to fry. These are $19 plus ship at DIY.
$ MAKE OFFER.
MS2 CPU/daugterboard. If you're still running MS1, quit living in the stone age and buy this! Comes in original box with bootload jumper and little protective foam on the pins. Was working perfectly when removed for my MS3 upgrade. These are $96 plus shipping at DIYautotune.
$75 shipped CONUS. Sold.
Aluminum case with endplates & screws, for MS1 or MS2 using a v3.0 board. This has been installed & removed from my car several times over the years for various MS upgrades & modifications. It is in good used condition with a few fingerprints on it, and some light surface scratches from living behind/under the passenger seat. Looks like DIY only has the black anodized ones in stock right now at $34, and I believe these bare aluminum ones are usually $30 plus ship.
$20 shipped CONUS. Sold.
The only forms of payment I will accept are Paypal (I'll eat the fees) or a USPS money order. Will combine shipping for multiple purchases. Prices will be slightly lower for local/FTF sale.
MS1 CPU, worked perfectly prior to removal for MS2 upgrade. Good for a spare or to replace the one you somehow managed to fry. These are $19 plus ship at DIY.
$ MAKE OFFER.
MS2 CPU/daugterboard. If you're still running MS1, quit living in the stone age and buy this! Comes in original box with bootload jumper and little protective foam on the pins. Was working perfectly when removed for my MS3 upgrade. These are $96 plus shipping at DIYautotune.
Aluminum case with endplates & screws, for MS1 or MS2 using a v3.0 board. This has been installed & removed from my car several times over the years for various MS upgrades & modifications. It is in good used condition with a few fingerprints on it, and some light surface scratches from living behind/under the passenger seat. Looks like DIY only has the black anodized ones in stock right now at $34, and I believe these bare aluminum ones are usually $30 plus ship.
The only forms of payment I will accept are Paypal (I'll eat the fees) or a USPS money order. Will combine shipping for multiple purchases. Prices will be slightly lower for local/FTF sale.
Last edited by ScottFW; 10-06-2011 at 11:30 AM.
Reply
0
0
09-26-2011, 07:49 PM
#3
Senior Member
Thread Starter
iTrader: (4)
Join Date: Jan 2008
Location: Falls Church, VA
Posts: 1,361
Total Cats: 17
MS2 module is tentatively sold locally.
The other stuff is still available and I realize demand for those will be lower. I'll leave them up for a little while but if they don't sell in a reasonable time it's off to fleabay with 'em.
The other stuff is still available and I realize demand for those will be lower. I'll leave them up for a little while but if they don't sell in a reasonable time it's off to fleabay with 'em.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
