JakeLS01

iTrader: (4)

Hey guys,

This is jumped on me pretty quickly (within the past hour or so). I wasn't really read to go forced induction just yet because of finances, but I came across a almost exactly what I've wanted (excluding the year issue, ha).

I'm trying to figure out what modifications would need to be made to make a MP62 hotside kit with intercooler, trackdog tensioner, air diverter plates, koyo rad and Exede management with boomslang harness adapter fit on a 2001.

From what I know the Exede is specific to the 99-00 models, so that'd have to go. As far as the actual parts though, how much modifying would that take to fit onto a 2001? Any at all? A buttload?

Sorry for my ignorance, been searching a little but can't find too much.

BarbyCar

iTrader: (1)

Mechanically it should bolt right up. You don't mention but I assume you would have all the pipework from the blower to the ic to the tb?

The boomslang will be no good for your stock 01 ecu.

JakeLS01

iTrader: (4)

Yes, all the tubing would be there. The Exede and harness were the two things I figured would not be compatible. Thanks for your reply. Is there somewhere I can find this information or is it by trial and error/knowledge?

jeff_man

iTrader: (7)

Get a mega squirt and one of my dummy TB / bov set ups.
????
profit


99 kit is the same as the 01+. Electronics are the only difference.

JakeLS01

iTrader: (4)

Thanks for your reply!

sixace

What Jeff said. Sould be the same (as long as both cars have similar PS/AC setups).