eafy

I thought I would start a progress thread for those other crazy fools that are into S/C rather than turbos.

Here is my car before I start (already been posted in my noob post).








This week I have got the ECU all wired in and also the relevant sensors in place.

Wideband gauge:




Wiring for IAT and MAP:


ECU wiring




Adaptronic stuck to the back of the glovebox with velcro.




Lick of paint on the S/C outlet



Then the fun begins...



Loads of room to fill:


But the mounting bracket for the S/C doesnt fit so needs some fabrication so im stuck untill Monday.

Intercooled NA.

Sean

iTrader: (12)

Looks good. Did the car come factory with a 1.6l I know in the US all NB's have a 1.8l.

Techsalvager

outside the US some locations had 1.6l still coming in NA\NBs past 93

eafy

Yeah in Europe we get 1.6s

Less power than than 1.8 but it feels 'revier', there isn't a lot of difference between them on the road.

Only down side is that because the 1.6 is limited to Europe and Phillipines there isn't a wide selection of parts, most come from USA or Japan.

An MP62 1.6 NB has got to be quite rare.

Sean

iTrader: (12)

Nice I like the car. I have had both 1.6l and 1.8l to be honest in close to stock form I will take the 1.6l all day it is almost as fast but gas mileage is much better.

eafy

This is how I got to where I am now:

http://www.mx5nutz.com/forum/index.p...=1&entry687988

eafy

So over the weekend I got some longer studs and some 20mm spacers to give me the clearance.

Sean

iTrader: (12)

Looks great how does it run?

eafy

Its running great at the min.

The adaptronic ECU is still tuning it so it's early days yet.

It starts and idles great and the power picks up at 2k revs

mazpr

iTrader: (1)

Sure looks nice, although I knew a friend at the track who had a hard time with the supercharger belts. Sometimes they would snap without any warning or way too much slack, besides that it ran decent for a 1.6.

The Mercury Capri, if I recall well, is the same engine with the minor difference of the water circuation on the CH.

Greg G

Nice! More details on the dual throttle mod please! Trying to figure out the routing for the cables. Thanks!

eafy

Greg: Ill get some pics of the DTB soon, I have done my back in fitting this so It wont be for a few days.
Basically there is a second throttle cable holder on the 1st TB and then it runs along the top of the radiator and then under the charger to the 2nd TB.
Very simple but very very effective - no lack of response what so ever.

Mazpr: Hopefully I wil have no issues with slack as the auto tensioner is taking care of that

allanhelen

There is a huge thread here on DTB's that gives a lot of info or Mx5nutz has even more info

eafy

Yeah Nutz is a good place to look.

here is the more details pics anyway...

eafy

Little bit of painting done.

Cam cover




Black lghts

eafy

Added a boost gauge thats I picked up for next to nothing




Just need to change my speedo to white now to match these gauges.

eafy

Quick video I filmed to show the sound of the charger and exhaust note

eafy

Well the car has been for a dyno run and tune today.

I was expecting to get the car back with an optimistic 200 horses. The car had 110 from the factory so adding 90 is quite a large amount.

So we did this













And we got this:





WOW! thats a lot more than I was planning :blink:
Obviously the torque figure is wrong as the dyno needs recalibrating which is happening on Monday.

Sean

iTrader: (12)

That is great. I would imagine this will make for a great street set up. I am really surprised to see this much power out of a supercharger. How much boost is it set to?

eafy

Im surprised it made that much! I think it comes down to the intercooler being sooo good.
It hits 11 PSI on my engine.

I have fixed the youtube link above so now it works. It sounded like a jet!