thumpetto007

iTrader: (15)

I have a stock suspension, engine, tire/wheel 2001 miata... and I want to install a flyin miata master cylinder brace, but i found out it isn't compatable with my stock strut tower brace.

I've read a lot of conflicting posts on what this brace does.

Some say it reduces cowl shake over rough pavement

some say it makes the car understeer at autocross speeds

Others say it does absolutely nothing, and can be removed without effecting anything.

I'd like to get some feedback, but also really understand the physics behind the brace...

Thanks everyone

nitrodann

It weighs something, it doesnt make your tyres stickier, and it produces no boost pressure.

Take it off.

mgeoffriau

iTrader: (7)

It might reduce NVH somewhat, and thereby give the sensation of a stiffer car.

thumpetto007

iTrader: (15)

^ interesting

wannafbody

iTrader: (1)

IME it reduces cowl shake on rough pavement. On a smooth AX or road course, it wouldn't be a benefit.

LetItSnow

The way the front subframe is structured, I'd be surprised if this isn't the right answer.

thumpetto007

iTrader: (15)

I removed the strut tower brace, installed master cylinder brace. Took an aggressive drive, and can see no decrease in handling.

I'll be surprised if the master cylinder brace actually stays tight. I was quite disappointed with it. Flyin Miata brace btw.