Help needed - Quick!
#1
Junior Member
Thread Starter
Join Date: Sep 2005
Location: The Golden Triangle, Ontario
Posts: 283
Total Cats: 0
Help needed - Quick!
So I got the old diff out of the beater, but while removing things the inside cap on one of the drive shafts popped off. I am pretty sure that a ball bearing got away from me. I have 5 but I am sure that there should be 6.
Can some one look it up in the FSM, please?
If I can't find this missing ball bearing I may need to head home and take off one of the drive shafts from my other car (that I am installing a Torsen into)
What is the procedure for removing the driveshaft from the car?
Thanks for the help...
Can some one look it up in the FSM, please?
If I can't find this missing ball bearing I may need to head home and take off one of the drive shafts from my other car (that I am installing a Torsen into)
What is the procedure for removing the driveshaft from the car?
Thanks for the help...
Last edited by blue89turbo; 10-11-2008 at 10:56 PM.
#4
Junior Member
Thread Starter
Join Date: Sep 2005
Location: The Golden Triangle, Ontario
Posts: 283
Total Cats: 0
I had to race home and take a ball bearing from one of my other drive shafts.
I am glad that I now have a winter beater again!
I have been riding the bike rain or shine since the beginning of June....
Thread
Thread Starter
Forum
Replies
Last Post