Suspension, Brakes, Drivetrain discuss the wondrous effects of boost and your miata...
Sponsored by:
Sponsored by:

Increasing rear grip...options?

Thread Tools
 
Search this Thread
 
Old 10-04-2013, 11:38 PM
  #21  
Senior Member
Thread Starter
iTrader: (1)
 
wannafbody's Avatar
 
Join Date: Nov 2010
Posts: 977
Total Cats: -369
Default

I already have a 12mm rear bar on the car and 28mm on the front.
wannafbody is offline  
Reply
Leave a poscat -1 Leave a negcat
Old 10-05-2013, 12:01 AM
  #22  
Elite Member
iTrader: (2)
 
Mobius's Avatar
 
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
Default

Disconnecting an end link is the least rear bar of all.
Mobius is offline  
Old 10-05-2013, 03:56 AM
  #23  
Former Vendor
iTrader: (31)
 
Savington's Avatar
 
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,099
Default

Every time someone suggests removing the rear bar on a track car, I cry myself to sleep.
Savington is offline  
Old 10-05-2013, 09:18 AM
  #24  
Moderator
iTrader: (12)
 
sixshooter's Avatar
 
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,650
Total Cats: 3,011
Default

Originally Posted by Savington
Every time someone suggests removing the rear bar on a track car, I cry myself to sleep.
Me too.

I still don't think he has checked into whether he is running out of rear suspension travel mid-corner.
sixshooter is offline  
Old 10-05-2013, 10:27 AM
  #25  
Senior Member
Thread Starter
iTrader: (1)
 
wannafbody's Avatar
 
Join Date: Nov 2010
Posts: 977
Total Cats: -369
Default

Originally Posted by sixshooter
Me too.

I still don't think he has checked into whether he is running out of rear suspension travel mid-corner.
Unfortunately I can't as it's a track only car so I'm going to make a change before I go to the track again. Most likely I'm going to switch rear shocks between the 2 cars and replace the NB top hats with ISC top hats for a bit more travel. Just bouncing on the back of the car the setup currently on the track car is softer than the one on the street car.
wannafbody is offline  
Reply
Leave a poscat -1 Leave a negcat
Old 10-05-2013, 11:59 AM
  #26  
Elite Member
 
JasonC SBB's Avatar
 
Join Date: Jul 2005
Posts: 6,420
Total Cats: 84
Default

Originally Posted by Savington
Less rear ride height, less front rebound. Don't bandaid it with toe changes. When was the last time the car was cornerweighted and/or aligned? What does the tire pyrometer say?
Shouldn't that be *more* front rebound? The reasoning being - on corner exit you're unwinding the wheel and adding more power... the car derolls and squats, so nose comes up, and more low speed front rebound will reduce front grip and thus reduce oversteer?
JasonC SBB is offline  
Old 10-05-2013, 04:05 PM
  #27  
Senior Member
Thread Starter
iTrader: (1)
 
wannafbody's Avatar
 
Join Date: Nov 2010
Posts: 977
Total Cats: -369
Default

I swapped the shocks today. The 325# springs went on the street car and the 350# went on the track car. I also added the ISC top hats. I took the street car for a ride and it's apparent that the shocks that were on the track car are valved softer than the ones that were on the street car. After the switch the street car now kinda glides over rough pavement. Hopefully the increased rebound will help keep the rear planted better coming out of corners on the track car.
wannafbody is offline  
Reply
Leave a poscat -1 Leave a negcat
Old 10-08-2013, 05:49 PM
  #28  
Former Vendor
iTrader: (31)
 
Savington's Avatar
 
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,099
Default

Originally Posted by JasonC SBB
Shouldn't that be *more* front rebound? The reasoning being - on corner exit you're unwinding the wheel and adding more power... the car derolls and squats, so nose comes up, and more low speed front rebound will reduce front grip and thus reduce oversteer?
More front rebound will keep the nose down on exit and increase front grip. Let the nose rise and weight shifts to the rear tires on exit as it should. Hence less front rebound (at least IMO).
Savington is offline  
Old 10-08-2013, 09:01 PM
  #29  
Elite Member
iTrader: (1)
 
Leafy's Avatar
 
Join Date: Jun 2012
Location: NH
Posts: 9,479
Total Cats: 104
Default

Originally Posted by Savington
More front rebound will keep the nose down on exit and increase front grip. Let the nose rise and weight shifts to the rear tires on exit as it should. Hence less front rebound (at least IMO).
Doesnt weight shift irregardless of body roll.
Leafy is offline  
Old 10-08-2013, 09:15 PM
  #30  
Senior Member
Thread Starter
iTrader: (1)
 
wannafbody's Avatar
 
Join Date: Nov 2010
Posts: 977
Total Cats: -369
Default

In talking with a friend he said that in dirt track racing that they'd use a soft rebound shock on the right front and a stiff rebound shock on the left rear to increase rear traction coming out of a corner. Since we have to turn both ways on a road course you'd tune both shocks on an axle the same.
wannafbody is offline  
Reply
Leave a poscat -1 Leave a negcat
Old 10-08-2013, 10:24 PM
  #31  
Moderator
iTrader: (12)
 
sixshooter's Avatar
 
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,650
Total Cats: 3,011
Default

Originally Posted by wannafbody
In talking with a friend he said that in dirt track racing that they'd use a soft rebound shock on the right front and a stiff rebound shock on the left rear to increase rear traction coming out of a corner. Since we have to turn both ways on a road course you'd tune both shocks on an axle the same.
You should race dirt track. Problem solved for us.
sixshooter is offline  
Old 10-09-2013, 10:16 PM
  #32  
Senior Member
Thread Starter
iTrader: (1)
 
wannafbody's Avatar
 
Join Date: Nov 2010
Posts: 977
Total Cats: -369
Default

A dirt track Miata would be cool.
wannafbody is offline  
Reply
Leave a poscat -1 Leave a negcat
Old 10-10-2013, 07:48 PM
  #33  
Junior Member
 
Vilko's Avatar
 
Join Date: Mar 2012
Posts: 111
Total Cats: 8
Default

So do you know if you were on the bumpstops exiting the corner or did you just guess you were?
Vilko is offline  
Old 10-10-2013, 09:57 PM
  #34  
Senior Member
Thread Starter
iTrader: (1)
 
wannafbody's Avatar
 
Join Date: Nov 2010
Posts: 977
Total Cats: -369
Default

Originally Posted by Vilko
So do you know if you were on the bumpstops exiting the corner or did you just guess you were?
Just a guess, I'm headed to the track Sunday so I'll find out if I've solved the issue.

I was talking to a guy today who told me that the local dirt track was having a race this weekend with a $50,000 purse. No wonder dirt track racing is so popular.

Last edited by wannafbody; 10-11-2013 at 08:44 PM.
wannafbody is offline  
Reply
Leave a poscat -1 Leave a negcat
Old 10-10-2013, 11:32 PM
  #35  
Elite Member
iTrader: (11)
 
miatauser884's Avatar
 
Join Date: Feb 2009
Posts: 2,959
Total Cats: 11
Default

Mine is very well balanced with the fm front barand stock rear bar. Much better than with no rear bar. The car it's extremely predictable.

I've got the nb tophats, fcm bumpstops. I think the rear bumpstops may be cut in half, id have to check.

Maybe slightly less front bar?
miatauser884 is offline  
Old 10-11-2013, 08:00 AM
  #36  
Moderator
iTrader: (12)
 
sixshooter's Avatar
 
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,650
Total Cats: 3,011
Default

Originally Posted by djp0623
Maybe slightly less front bar?




The balance of any car between oversteer and understeer is a function of weight balance front to rear versus spring rates front to rear (and the sway bars are springs). If a setup has so much rear spring that a rear sway bar is unnecessary to achieve balance, then you have too much rear spring or not enough front spring (including sway bar). This is a bit of a simplification for the sake of illustration as there are a few other mitigating factors involved as well. Such as, the rear suspension bottoms out causing the car to behave as if the rear spring rate has suddenly skyrocketed (thus causing an abrupt onset oversteer condition).
sixshooter is offline  
Old 10-13-2013, 10:25 PM
  #37  
Senior Member
Thread Starter
iTrader: (1)
 
wannafbody's Avatar
 
Join Date: Nov 2010
Posts: 977
Total Cats: -369
Default

Update, took both cars to Nelson Ledges. If you aren't aware, this is probably the bumpiest track in North America. The track car felt better, I didn't feel as if the rear was going to slide out at the touch of the throttle. So the changes that I made by switching shocks and springs and tophats seemed to improve grip. Incidentally, switching shock and springs to the street car didn't seem to have a negative impact. The 1.6 is definitely lacking power but the car is able to put that power down quite effectively. For some reason it seems to hook a little better than the track car(maybe the cage plays a role). My friend took me for a few laps and about scared the crap outta me. I was seriously impressed that despite throwing it into the corners it didn't break traction despite the tires howling in protest. That being said, after driving both cars, I'm coming to the impression that the Yoke AD08's are a more forgiving tire than the Star Specs on track.
wannafbody is offline  
Reply
Leave a poscat -1 Leave a negcat
Old 10-13-2013, 11:25 PM
  #38  
Elite Member
 
jacob300zx's Avatar
 
Join Date: Jul 2007
Location: Houston, TX
Posts: 3,201
Total Cats: 145
Default

I would be willing to bet your problem is shock travel, **** bump stops, greasy tires, bad driving, and unpredictable diff engagement combined.
jacob300zx is offline  
Old 10-14-2013, 08:22 AM
  #39  
Moderator
iTrader: (12)
 
sixshooter's Avatar
 
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,650
Total Cats: 3,011
Default

Originally Posted by jacob300zx
I would be willing to bet your problem is shock travel, **** bump stops, greasy tires, bad driving, and unpredictable diff engagement combined.
Yeah, but if you take all of that out of the equation there wouldn't be a problem.
sixshooter is offline  
Old 10-14-2013, 10:11 AM
  #40  
Senior Member
Thread Starter
iTrader: (1)
 
wannafbody's Avatar
 
Join Date: Nov 2010
Posts: 977
Total Cats: -369
Default

Oh, I'll readily admit that I'm not the best driver, I'm fairly slow but I am focusing on being smooth and increasing speed. My friend who is a good driver has said that the street car seems to stick better as well.

One thing I noticed last time I was at the track, we swapped the Hoosier R6s on the track car and the improved grip helped. I was actually able to get the car to understeer by turning the steering wheel quickly.

Maybe the VLSD is the difference between the 2 cars.
wannafbody is offline  


Quick Reply: Increasing rear grip...options?



All times are GMT -4. The time now is 04:47 PM.