choosing the correct bumpstops
07-26-2008, 09:06 PM
#1
I'm Miserable!
Thread Starter
iTrader: (5)
Join Date: Dec 2006
Location: jacksonville, fl
Posts: 1,711
Total Cats: -1
choosing the correct bumpstops
going to be ordering bumps from FCM here soon. currently have tokico HPs with tokico springs, but i plan on upgradeing to illuminas and stiffer springs later on. so what would be better for now and when i upgrade, 36mm on all 4, or 36mm on front and 46mm rear? will also be ordering a RB hollow front bar if that matters.
Reply
0
0
07-28-2008, 01:19 AM
#5
Junior Member
Join Date: Jun 2008
Location: Fairfield, California
Posts: 436
Total Cats: -7
Or just call him on the phone (408-221-8247); it shouldn't take more than a few minutes.
By the way, have you checked out the Miata suspension design spreadsheet from his website? It's under the "Chassis Setup" drop down menu. It seems to do a pretty good job of predicting chassis behavior for the simple and minor modifications I've done to my chassis. At the very least it will get you thinking in the right direction.
By the way, have you checked out the Miata suspension design spreadsheet from his website? It's under the "Chassis Setup" drop down menu. It seems to do a pretty good job of predicting chassis behavior for the simple and minor modifications I've done to my chassis. At the very least it will get you thinking in the right direction.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM
Motorsport-Electronics
ECUs and Tuning
0
09-05-2015 08:02 AM
