miata xtr 1.6 clutch kit on my pops 92 miata
#21
Just want to add my $.02. I was having a similar problem with Gripforce f-1 6-puck clutch. I my case it turned out that the inner portion of the pressure plate was making contact with the outside edge of the sprung center hub of the friction disc effectively locking the two together. I ended up machining the outside edge of the center hub to allow clearance between the two. After reinstalling, worked like new, albeit much grabbier!
#22
do you have any pictures i would greatly appreciate a look at what you did
direct link to my pictures i got them on my server now
Index of /shared/jacobrussell/miata-xtr-clutch
direct link to my pictures i got them on my server now
Index of /shared/jacobrussell/miata-xtr-clutch
Last edited by jacobrussell; 03-19-2009 at 06:05 PM.
#23
Unfortunately, I made the mistake of not taking photos of what I did before reinstalling. But what I can do is take some photos of an XTR stage 2 clutch that I ordered as back up I case gave up on the F-1 Stage 3, to illustrate what I am talking about. After comparing the two kits side by side, I found they both used the same pressure plate just painted a different color, and also that the center hub of both friction discs carry the same part number. I do my best to post some photos as soon as I am able to.
Thread
Thread Starter
Forum
Replies
Last Post
Rudes333
Miata parts for sale/trade
17
11-05-2015 01:16 PM
Dustin
Miata parts for sale/trade
4
09-23-2015 10:34 PM
Andifer
Miata parts for sale/trade
8
09-23-2015 05:43 PM