miatamike203

So i broke my new torsen diff today. I broke the aluminum mount just like this one here.




Im going to bring it to school and weld it back then LPI it for cracks with the zyglo we have at school then im going to weld some gussets were this thing broke.

Is this a comment place for these to brake and also any reason why they brake? I was only on 5 psi when this broke coming off a stop sign.

falcon

iTrader: (13)

My only guess would be excessive wheel hop causing too much stress.

9671111

iTrader: (10)

*

miatamike203

no wheel hop just got on it half throttle and 5psi then snap.

curly

iTrader: (25)

They're manufactured to break there, hence the little notch. Common breaking point.

hustler

iTrader: (6)

I know this is rocket surgeon ****, but did you let it wheel-hop ever?

falcon

iTrader: (13)

lol.

Solid diff mounts FTW.

Savington

iTrader: (31)

Did the diff come out of a car that was involved in a big frontal wreck? If you just got the diff from a dismantler, and it came from a car that was wrecked in the front, I bet it was cracked when you put it in.

The only way those things break is from big frontal impacts, or slamming the PPF over curbs over and over again.

FYI, the 2nd gen N/A FC housings bolt right up and don't have that little notch. You just have to use a Miata bushing set.

miatamike203

I got the diff from sixshooter.

Im looking for one of those housings for now but im going to fix mine at school and beef it up.

nitrodann

Dam, Mine hopped a lot till I changed engine and diff mounts.
4th gear clutch kicks in the wet in a straight line (N/A) it still hops, 3rd is ok though.

To no ones surprise I have 4 Broken 1.6 diffs in the shed.

Dann

miatamike203

I also have extra bracing as im not running a ppf.

dustinb

I would think without the ppf it'd break at that point very easily. The PPF keeps is stable and straight, so I can definitely see it breaking at that weak spot.

miatamike203

I fixed everything today im going to have pics on how i fixed it tomorrow when i go to put it in.

rider384

iTrader: (3)

As Dustin said, I would not be surprised if it broke again without the PPF in there.

falcon

iTrader: (13)

LS1 FD guys seem to not have issues nixing the PPF when they go LS1. Although they do add a new brace.

miatamike203

Im going to have pic of the what i did to fix the broken diff.

y8s

iTrader: (8)

I'm going to post this piece of advice again:

If you dont want the diff to break at the notch, grind the material on the sides of the notch so it's a smooth curve instead of a sharp notch.

miatamike203

Once you see the pics of how i did it, then you will be like ohhhh. lol

I eliminated the mounting wings and made a plate going over the top of the diff and pit bolts into the diff.

Cookiesoup

wow i wouldn't have thought it would break there