turbobluemiata

iTrader: (8)

Okay well I got the PPF and differential bolted up, now to the axles I am missing a part of it that I don't know what its called maybe the other half of the CV joint its circled in picture! Where can I get this part ?? Also I need some locknuts that fit this axle cant reuse mine! And how do you put in the 1 piece axles do I have to unbolt the suspension??? Oh yea and my axles dont bolt to the diff they push in, this is just the best picture I could find to illustrate what part Im missing

olderguy

iTrader: (19)

Probably best to get new axles. The nuts should be available in any auto parts store. Unbolting the top bolt above the hub is sufficient to install a one piece axle. A two piece axle can be done without unbolting that bolt.

turbobluemiata

iTrader: (8)

is the area circled in my pictures the same on all year miatas? and if I buy any axle cant I just swap that onto mine???

turbobluemiata

iTrader: (8)

no one knows if the spline that go in to the hub is the same on all years?

olderguy

iTrader: (19)

All the ones that I have done have the same spline; but some of the later years have different threads and nuts. Someone else should chime in here if there is a spline variation somewhere.

hustler

iTrader: (6)

according to everyone but me, yes, they are all the same from a 1.8. However, I have a set of axles in my garage that will not fit into the 1.6 hubs. Apparently they only exist in a parallel universe which I access through my garage door / wormhole. The spline teeth are too tall.

However, its a 99.9999999999999999999% chance that any you pick-up will fit.

turbobluemiata

iTrader: (8)

What I wanna do Is buy a 1.6 axle and take circled piece off and put on my 1.8 axle? will this work? I dont have any 1.6 axles to compare with but I think that piece might be the same on all years, Im trying to not drop $100+ dollars on a new (used) axle when I have one I think can be salvaged for much less