Cam alignment after timing belt change
10-03-2011, 07:44 PM
#1
Boost Pope
Thread Starter
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,023
Total Cats: 6,591
Cam alignment after timing belt change
Seems like this is a common malady...
Here is what the cam gears should look like when properly aligned with the crank at #1 TDC:
On the intake cam, the "I" is pointing upwards, and the sideways "E" is aligned with the "E" mark on the backing plate. The exhaust cam is set up opposite this.
Here is what the cam gears should look like when properly aligned with the crank at #1 TDC:
On the intake cam, the "I" is pointing upwards, and the sideways "E" is aligned with the "E" mark on the backing plate. The exhaust cam is set up opposite this.
Reply
1
1
Thread
Thread Starter
Forum
Replies
Last Post
