thesnowboarder

iTrader: (15)

Im looking to get a pair (2) of what i think are called striker plates, the 2 things hardtop side latches latch onto, if anyones got an extra set let me know

Ben

iTrader: (33)

they're actually pretty cheap from the dealer. I see them going for more in the classifieds and on ebay than you can get them for new.

thesnowboarder

iTrader: (15)

i c, well ill check my local dealer again tomorrow thanks for the heads up, how much should they be?

Ben

iTrader: (33)

I don't remember b/c it's been a good year since I checked. $50 I think, including the hardware (4 bolts). Part #'s are in the m.net garage.

Ben

iTrader: (33)

$44.95 here
http://www.finishlineperformance.com...n&key=MIAE1001

thesnowboarder

iTrader: (15)

Are the ones above the windshield interchangable with the side latches? Im thinking of getting the spec miata plates but would like the side latches to be snug and possibly use the striker plates for the side latches and the spec plates for more security for the upper latch locations

Ben

iTrader: (33)

Oh, you need the actual latches? The link was for the striker plates. Yeah, I believe that the latches are all the same on the hardtop and the softtop. Sometimes you can score used latches cheap. New, they're pretty expensive. If you're going to bolt the front down, you may as well bolt them all down. I don't think that the SM brackets are too expensive.

thesnowboarder

iTrader: (15)

no no no i must not have been clear, i need the striker plates, but are the ones from the upper mounts interchangable with the side ones?

As for the spec miata brackets, i feel like the side latches wont get it as snug down as the latches will, am i incorrect?

jasonrobo02

iTrader: (13)

The top strikers are not the same as the side strikers. They look similar, but if you have both in your hands you'll see the differences.

Ben

iTrader: (33)

yeah the strikers are different. i'm too lazy to take a pic for you, so take my word for it.

y8s

iTrader: (8)

I have a set of side strikers AS WELL AS the hard dog "low profile" latches for use with the hard core bar. too bad they dont work with the hard core bar, but they are lower profile.

thesnowboarder

iTrader: (15)

So do the spec miata hardtop mounting kits keep it as snug as the oem latches would?

My gf said she wanted to get me a set for x mass so far i have only found these

http://www.saferacer.com/republic-ha...?productid=538

Would anyone reccomend a better or cheaper set? I would like the best snug fit for the hardtop to my car so keep that in mind.
Thanks everyone

disturbedfan121

iTrader: (5)

i ahve the set from planet miata dn they hold really nice, i also have the old OEM side latches