WTB low oem injector resister pack
01-23-2010, 05:58 PM
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2009
Location: 94401
Posts: 240
Total Cats: -2
WTB low oem injector resister pack
I just got some rc550 low ohm injectors. Does anyone have or can make me a resister for them?
or is my ms able to run them as low ohm injectors without a problem?
or is my ms able to run them as low ohm injectors without a problem?
Reply
0
0
01-23-2010, 06:52 PM
#2
Your ms can run them low ohm if you add additional grounds to the harness. Optionally, just go to radioshack and buy some 10 ohm 10 watt resistors, and wire them in-line with the power wires of each injector. I should point out that dsms use a different style of injector clip. You can either purchase them from RC for around 50 dollars, or napa carries a clip that works. I believe the ones from napa are listed as being for a 97 Camaro.
Reply
0
0
04-05-2010, 07:01 PM
#4
Your ms can run them low ohm if you add additional grounds to the harness. Optionally, just go to radioshack and buy some 10 ohm 10 watt resistors, and wire them in-line with the power wires of each injector. I should point out that dsms use a different style of injector clip. You can either purchase them from RC for around 50 dollars, or napa carries a clip that works. I believe the ones from napa are listed as being for a 97 Camaro.
what that man said is probly your best bet!
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
