miataz

iTrader: (1)

anyone have any used ones cleaned and flowed? Or just used and i can send them out thanks

paul

iTrader: (21)

low impedance ok?

fourwhls

iTrader: (2)

I have a set (6) of low Z supra injectors.

$20 +shipping and they're yours.

miataz

iTrader: (1)

kind of a dumb question but i never knew this...whats the difference between low and high impedance

Dow.tom

iTrader: (3)

one you need to add a resister in the line for it work... not sure which

Joe Perez

iTrader: (8)

Low impedance (aka Peak & Hold) injectors typically have a series resistance in the 2-4 ohm range. The are capable of faster performance (less turn-on lag) than high-impedance injectors, but only when driven by a PWM-capable ECUs. They can be used with regular ECUs by adding large series resistors to prevent them from being destroyed, though the performance advantage is lost when this is done.

High impedance (aka saturated) injectors are what we consider to be "normal" injectors. They require no fancy drive circuitry.

Ben

iTrader: (33)

Joe, do you really think either one of those guys will actually understand anything you just wrote?

miataz

iTrader: (1)

lmfao sort of, so pretty much i have to buy resistors to run low impedance injectors with the ms? I mite as well just buy the RC 440 high impedance injectors probably be the same amount of money buying all of this **** to run low impedance