slutz4

iTrader: (3)

Im looking to buy a good running 1.8 engine in the IN/OH/KY area. 94-00 preferred.

It can be stripped down. I dont need any manifolds, fuel rails, alternators, or anything that is attached externally to the engine.


~Steve

browning

iTrader: (16)

hi im in northern arkansas have one out of a 97 with 47k mileshas cam gears and has the coolant reroute done if your interested will take $650 for it. had it forsale on here earlier had a buyer then backed out when his wife found out
http://s8.photobucket.com/albums/a43...4.jpg&newest=1

slutz4

iTrader: (3)

Im interested, just not sure if Id want to drive that far yet. Ill let ya know. If you ever go north for any reason send me a pm and we could meet up. If nothing else pops up in about a month or so, id be willing to pay shipping if its reasonable.

slutz4

iTrader: (3)

bump. Still looking. May be interested in 1.6 also. Only if its rebuilt/built/low miles.

Larimer

iTrader: (4)

I've got a 94 longblock but the flywheel bolt holes got jacked up due to the bolts loosening on an overrev. Otherwise the compression is great and it's got 86k miles on it. If nothing else the head is good, I checked compression on it before it was pulled and they were between 190-195 on all 4. I swapped it out for another engine when really only the crank probably needs replaced (holes are ovalized and didn't want to try messing with inserts/helicoils).

boileralum

iTrader: (8)

I've got an 02 w/ 67k that is still attached to a 6-speed in the Louisville, KY area. I am asking $750 each for the engine and transmission, or $1300 for both together. I can throw in an engine harness and 01 ecu (no immobilizer, unfortunately) if you buy the engine. Or I also have a 99 head with intake manifold but no TB/TPS I'll sell for $250.