WTB: 15x9 6UL's
#6
One would need to know the casting alloy and heat treat condition (i.e. T6 or whatever). Many common casting alloys, such as 356, are aged at 325F. If exposed to a powder coat cure schedule of 375-400F for 10 minutes or so, some over-ageing could occur and the fatigue life of the wheel could be reduced. It all depends. 6UL's warranty is voided if powder coated.
Good luck, these are hard to come by used.
Good luck, these are hard to come by used.
Thread
Thread Starter
Forum
Replies
Last Post