WTB (turbo setup/harness/ms/fuel pump/suspension/more)
#1
I'm a terrible person
Thread Starter
iTrader: (19)
Join Date: Apr 2009
Location: Arizona
Posts: 7,174
Total Cats: 180
WTB (turbo setup/harness/ms/fuel pump/suspension/more)
97 Harness
The mounts off a stock radiator.
New fuel pump. or good condition.
Anyone near the Austin/San Antonio/Dallas area I need a passenger door, fender and a hood and front subframe.
HAVE MONEY READY. PM WHAT YOU GOT.
The mounts off a stock radiator.
New fuel pump. or good condition.
Anyone near the Austin/San Antonio/Dallas area I need a passenger door, fender and a hood and front subframe.
HAVE MONEY READY. PM WHAT YOU GOT.
Last edited by FRT_Fun; 12-04-2010 at 07:14 PM.
#6
I'm a terrible person
Thread Starter
iTrader: (19)
Join Date: Apr 2009
Location: Arizona
Posts: 7,174
Total Cats: 180
I actually though about putting it back to stock, but figured a cheap turbo kit will be just as reliable-ish and give it some good power. I may keep it, who knows. I'll see how it comes together. I want this setup to be on the super cheap though.
#9
I've got some of the stock stuff, and more of it coming off soon.
ECU, but it's for a 1.6L
Pick between my AGX/Tein combo or wait til I install (after finals) and you can have my stock **** free.
Buy my 15" BBS wheels, or wait until Christmas when I can afford to put tires on them and you can have my hollow spokes cheap.
I'm sure we can work out getting parts that way with the Texas crew...just let me know what works for you.
ECU, but it's for a 1.6L
Pick between my AGX/Tein combo or wait til I install (after finals) and you can have my stock **** free.
Buy my 15" BBS wheels, or wait until Christmas when I can afford to put tires on them and you can have my hollow spokes cheap.
I'm sure we can work out getting parts that way with the Texas crew...just let me know what works for you.
#10
I'm a terrible person
Thread Starter
iTrader: (19)
Join Date: Apr 2009
Location: Arizona
Posts: 7,174
Total Cats: 180
I'll need 1.8 stuff. But anything that crosses over will def work. I'm hoping I can get most of the stuff from tx. I don't mind waitingfor the wheels. I might have some suspension lined up, a bit more expensive then i want. But if I decide to strip this thing and autox it might be worth it.
Big thing i need is a stock ecu for manual 1.8
Big thing i need is a stock ecu for manual 1.8
#12
Senior Member
iTrader: (23)
Join Date: Oct 2009
Location: Chatsworth, SoCal
Posts: 948
Total Cats: 1
I have an old turbo kit that uses a gready Dp. It has guages as well (boost, egt, and a/f). I forget what the mani is for though I have had a few miatas. If you measure the distance between the top bolts at each end I can tell you if it will fit. i just dug it outof the garage. Its all a little dusty but the turbo was sealed off. It is oil cooled and will come with the lines and barb for the pan.
Let me know if your interested. Yours for 400+shipping.
I also have a set of NB bilsteins with FM springs. Low milage ike 4k maybe on shocks and maybe 15k on the springs. Like I said maybe. You will nee top hats and bushings. it sounds like you have some other offers that may work out if not then Lt me know and we can work something out.
Have a great day,
Jared
Let me know if your interested. Yours for 400+shipping.
I also have a set of NB bilsteins with FM springs. Low milage ike 4k maybe on shocks and maybe 15k on the springs. Like I said maybe. You will nee top hats and bushings. it sounds like you have some other offers that may work out if not then Lt me know and we can work something out.
Have a great day,
Jared
Thread
Thread Starter
Forum
Replies
Last Post