Bad hot start
 

Hey Mazda owners.
Been a lurker for a few months, you guys seem to be the largest base of Adaptronic users.
I don't have a Miata, but I'm posting this for suggestions to help my bad hotstart.
Car is a Corolla with a 4a Turbo, running a GT2560R as recommended from this site. Which is what you guys recommended for the 1600cc Miata, so I figured that would probably apply to a 1600cc Corolla, works a treat.

Anyway, no trouble with cold start, starts fine.
The problem is warm/hot starts, seems to crank for a while before firing.
My crank settings:
http://img840.imageshack.us/img840/803/imageone.jpg
Keep in mind, the car has no air temp sensor so assume the temperature is 0 degrees constant. The car also has no idle control.

Too much fuel or too much air?

Thanks in advance
Chris

1.8L, stock 265 injectors. Starts well from ~0-100c.

Crap im using way too much fuel.
Probably flooding the hell out of the cylinders.
Im running similar values but i have 440cc injectors.
I'll start with trimming them back 20 percent from 30degrees.

Thanks a lot, gives me a starting point.

Use the VE tuning option for cranking. Solved all my cranking problems.

When you changed from ms to ve did you have to completely change all your values in the cranking settings?

No, but it went from not starting to starting almost like stock.

I'm running about 30 ms/10 (550cc inj) from 80C on up to 130C and it cranks fine. Try setting yours to 38 ms/10 from 80C on up and see how it works.

Thanks soo much guys.
Reduced the fuel like 50 percent and now she cranks as it should.
Also now doesnt smell like fuel.
So glad Adaptronic is so easy to adjust values like so.