Ebc
 

Received my Deatshcwerks 600's today and will be installing them this weekend. As we are supposed to get 6-12" of snow Saturday/Sunday, I doubt I will be driving it, though.:vash:

After I get it going and tuned for wastegate 8 PSI I want to add an EBC and tune for 10 PSI. I know that the Adaptronic CAN do it, but I don't know what it entails, what EBC to buy, if there is anything other than the solenoid that I need for hardware, etc.

Anyone have any ideas of where I can start looking?

Travis, are you going to start selling a kit of whatever is needed for adding EBC?

The Adaptronic manual doesn't address it.

Stein; I'm sure the EBC kit sold by DIYAutotune will do the job and I don't think you'll find a better deal but; let's wait for Travis to chime in.

that's the solenoid I'd use (i already do). ECU shouldn't matter.

I will put together something official for you guys. As far as a kit, just the ebc from DIYautotune is all you need to have. Then route it into one of your emissions related auxillary outs like EGR.

Cool. Just ordered EBC kit from DIY.

Be careful with boost creep. Once you install your EBC, you may find yourself seeing over 20psi of boost.