knock
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Dec 2007
Location: Seven Valleys, PA
Posts: 638
Total Cats: 11
knock
It has occurred to me that i am clueless about the knock function of the adaptronic.
what values are too high?
under what conditions should i calibrate the sensor for base engine noise?
what values are too high?
under what conditions should i calibrate the sensor for base engine noise?
#3
Out of curiosity, do you have a huge spike around 4000-4300? Mine has always had one there. Last night I did a 5th gear roll on to 7K and let it wind all the way back down to 2K and the spike was there on the way up AND on the way down. I'm sure it isn't knock, especially on the way down with the throttle shut.
BTW, I saw values of 147 last night. Generally I see around 100 or so. If it is at the 4K range, I ignore it. I have such a conservative tune that I know I don't have knock so I haven't worried about it too much.
BTW, I saw values of 147 last night. Generally I see around 100 or so. If it is at the 4K range, I ignore it. I have such a conservative tune that I know I don't have knock so I haven't worried about it too much.
Thread
Thread Starter
Forum
Replies
Last Post
elesjuan
Build Threads
9
11-14-2018 12:18 PM
matthewdesigns
Suspension, Brakes, Drivetrain
1
10-10-2015 02:07 AM