AEM 30-0300 CAN New Saga
Hallo,
My problem with the AEM gauge is no CAN connection. I have read a lot about this in other forums on here: "AEM 30-0300 CanBus AFR Gauge", "CAN wideband directly to MS3 Basic" and "CANbus Wideband on MSPNP Pro" but couldn't solve the problem. I selected wideband in the initial setup and on the gauge cluster selected egoV1Gauge. The car runs, but I can't figure out why the CAN communication doesn't work. The wiring should be fine because the gauge works. I can read all the AFR values and below a picture of the connection at the ECU. I sealed the other wires coming out of the AEM gauge. Does someone have an idea what I missed/ did wrong? My setup: Year: Miata '91, put a turbo on it ECU: MS3 Firmware: 1.5.1 AFR gauge: AEM 30-0300 X-series UEGO gauge https://cimg4.ibsrv.net/gimg/www.mia...8acbe9a66d.jpg https://cimg3.ibsrv.net/gimg/www.mia...b75cf2c8f5.jpg |
What MS3 is that?
|
Originally Posted by Reverant
(Post 1587626)
What MS3 is that?
https://cimg0.ibsrv.net/gimg/www.mia...b7c448f2b.jpeg |
hello friend, I am with the same problem, what did you do to make it work?, I have that same configuration, could you leave your msq to see the configuration.
Thank you |
You need a can module. I first thought I could just connect it with the megasquirt, cuz I saw some other post with just that. Guess it’s not possible without a can module.
|
It is absolutely possible to connect directly without a separate can module.
|
|
All times are GMT -4. The time now is 03:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands