Oil Catch Cans
 

There has been a great need for a good MSM catch can for some time now. We finally got around to building them. We will do one for the NB next.

BEGi - - Front Page News - oil_catch_can

http://www.bellengineering.net/templ...e/PA217547.JPG

http://www.bellengineering.net/templ...e/PA267647.JPG
Stephanie

Slick!

Why can't that one be used on any car?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

just gotta change the brackets and find a location. but a universal design should be sold so the people who use zipties, like myself, would buy one :P

Perfect timming! I just have to change the bracket as thats where my swirl pot sits

how does this hook up?

Good question! Normally, the NB and NA do not have an oil return line like the MSM. The third bung on here is a secondary oil drain line to the oil pan. The one we put on my car will not have a drain line, but a smaller drain plug just to empty it.
Stephanie

The 1.6L has an awesome port just next to the oil filter you can return into....I'd love to hook into it.......just putting that out there.

http://www.boostedmiata.com/gallery2...serialNumber=1

between the filter and my foot, that rubber cap.

To the engine or frame of car? The can, itself, mounts to the frame in two places. We have fit it around an oil filter than has been relocated as well. I will get photos of that too.

http://www.bellengineering.net/templ...e/PA267651.JPG

To the engine - you would run a line from the cam cover breather to the inlet on the catch can. Then run the return line (if you want) to the turbo inlet tube. We are going to try and locate one on the driver side as well.
Stephanie

i thought the 1.6 na had the oil drain on the intake side somewhere.

Then the catch can for the MSM would work well on it also!
Stephanie

my cam cover has 2 breather ports. (i dont use a pcv valve.)

can we have a 3rd port for the turbo inlet or a breather/filter on the catch can?

and please tell me this will be inexpensive.

Yeah looking at it now, Im gonna have to be creative lol

http://i94.photobucket.com/albums/l1...photo-1399.jpg

We're gonna put one on the NB at the diagnostic port. Just behind the strut tower. Would that work better?
Stephanie

great, now its time for you guys to make a swirl pot/header tank combo.

For me it deffinately would but I do understand the fact that If im right, im THE only MSM with my current setup so I guess Ill just wait till you have the other ones done that I can use.