Originally Posted by Joe Perez
(Post 1306323)
I used to have that exact same lathe. Homier Tools, right?
After cleaning up all the slop and lubing the hell out of everything, it was surprisingly capable for the price. Used to to make spring-perch spacers for my Bilsteins, a hub to mount a 36-1 crankwheel on top of the stock pulley, to flatten the (originally triangular) teeth on said wheel, a bunch of random little spacers and threaded adapters for custom projects at work, and so on. Not much swing, but a great little tool for working on little parts. It is my father's, but I use it more than he does for various little projects here and there. I actually had designed and bought the materials for spring perch spacers for my Koni's on my car, but ended up just getting some ebay sleeves and non sagged springs (better all around). |
3 Attachment(s)
Quick update.
My friend found some NB lower radiator mounts for $25 and picked them up. They bolt into place, still need to check the radiator fit and then upper mounts will need to be made (easy). The under hood theme of this car is going to be white, black and a splash of red, so my friend painted the valve cover. https://www.miataturbo.net/attachmen...ine=1455214162 He also fabbrd his first piece all on his own. A block of plate for that warm up idle thing (since we are ditching all those coolant hoses). https://www.miataturbo.net/attachmen...ine=1455214162 https://www.miataturbo.net/attachmen...ine=1455214162 Also, what the heck is that thing called? We have been calling it the warmup thingie. I know what it does at least... |
2 Attachment(s)
Turns out NB lower radiator mounts and NB radiators will drop right into an NA. Just going to have to make some top mounts (easy). I couldn't find anything verifying they fit by searching, so cool to see they do!
https://www.miataturbo.net/attachmen...ine=1455232768 https://www.miataturbo.net/attachmen...ine=1455232768 |
4 Attachment(s)
Quick update.
Warm up thingy block off plate done. https://www.miataturbo.net/attachmen...ine=1455646357 Timing belt, coolant temp sensor, and block off plate done. https://www.miataturbo.net/attachmen...ine=1455646357 Rerout done, valve cover reinstalled. https://www.miataturbo.net/attachmen...ine=1455646357 Everything but the fans and intercooler reinstalled. Getting close to done. My friend will be working on the intercooler and piping for that today. https://www.miataturbo.net/attachmen...ine=1455646357 |
Mmmm, I love to see cars resurrected. Keep it up!
|
Warm up thingy = Air valve
Its a thermostatically(wax pellet I believe) controlled idle valve. |
Originally Posted by hi_im_sean
(Post 1308251)
Warm up thingy = Air valve
Its a thermostatically(wax pellet I believe) controlled idle valve. |
It lives! A bit tappy, but we are just going to assume that is the HLAs since it hasn't been run in a while.
Still some things to do, the top of the rad is held by zip ties, as is the intercooler since my friend had to move it a bit to clear the new rad. Big news is that it will be getting a new ECU come spring. You guys may boo, but my friend got a good deal on a compleet Link setup. Not the best, but I have ridden and seen plenty of cars running well on them, so I know they work fine. He should be able to sell the Doodoo box and MSD for around double what the link cost. It will be nice to get rid of the AFM. That said, since we changed so much around, we are going to run it on the voodoo for a bit to make sure everything is working well mechanically before diving into electricals. |
1 Attachment(s)
|
Sent the link out today and he should get it on Wednessday. i look foreward to seeing this car running on it. Should be a good improvement over what he has now even with it being old. It ran fine in the car it came out of but we changed it over to a MSPNP. Seems to be one of the most complete links i have found around although it does need a new ribbon cable. It even comes with the USB link box.
|
Originally Posted by mmmjesse
(Post 1310000)
Sent the link out today and he should get it on Wednessday. i look foreward to seeing this car running on it. Should be a good improvement over what he has now even with it being old. It ran fine in the car it came out of but we changed it over to a MSPNP. Seems to be one of the most complete links i have found around although it does need a new ribbon cable. It even comes with the USB link box.
Ribbon cables are easy. Worst case, I found a display and cable in minty shape we can snag for cheap. I will be jellous that it can be tuned without a laptop. I will have to see about MSDroid for my car. |
hell, i would get that other controller and cable if it is cheap. always good to have spares of something that is no longer made. The disc for the tuning software is coming with it also so he can use the usb link to tune with the laptop.
|
Originally Posted by mmmjesse
(Post 1310018)
hell, i would get that other controller and cable if it is cheap. always good to have spares of something that is no longer made. The disc for the tuning software is coming with it also so he can use the usb link to tune with the laptop.
|
5 Attachment(s)
So, a Greddy kit popped up local. Blurry/darkish phone pictures for the add and all that. Manifold, TD04-15G, downpipe, intake, heat shield, and oil lines. Guy wanted $300. Didn't look that rusty from what I could see in the pictures. I told my friend to go take a look, since it would at least be better than the Chinese stainless steel tube manifold on there now. Figured some relief cuts and it would last decently.
He went to go pick it up today, said it looked to be in very good shape, so I asked for some pictures. Hang on, that's not a cast manifold... What? https://www.miataturbo.net/attachmen...ine=1457043923 So I did some research. Turns out it is an ARTech greddy replacement manifold. 0.145" tubing, full welds, laser cut flanges. The works. Nice! Doesn't even look like it has ever been bolted up to an engine. https://www.miataturbo.net/attachmen...ine=1457043923 So, looking at the rest of the kit. Hang on, that doesn't look like a Greddy downpipe either. Turns out it is a Turbo Tony downpipe (that took a bit of searching to find). Score! https://www.miataturbo.net/attachmen...ine=1457043923 So really, it is a "formerly" Greddy kit. Only part left seems to be the TD04-15G. Is the actuator supposed to be mounted with only one bolt for this kit? https://www.miataturbo.net/attachmen...ine=1457043923 https://www.miataturbo.net/attachmen...ine=1457043923 Also, rebuild the turbo just because? Or should I check it out and see how much shaft play it has first? |
Ok, looking around, I am not 100% sure this is an ARTech manifold. I do think I found this exact one on another forum though. Looks like it is ceramic coated?
https://grassrootsmotorsports.com/fo...d/70564/page1/ |
4 Attachment(s)
So, updates. I have confirmed that that link above is the kit/manifold that my friend got. We found the guy who bought it from the person in that thread, turns out it has changed hands 5 times since coming off that car! Price dropped each time it changed hands until my friend got it for a steal!
Anyway, we found a great deal on some two season old NA HDs off a spec Miata. Super cheap shipped, less than the cost of a single Koni yellow new. Got some coil over sleeves off amazon, they came with ~~350lb/in springs and I should be picking up the springs from a set of blown Raceland Ultimo this wednesday. That will give us helper springs and 485/350 spring rates to throw on the billies. Decided to machine the sleeves so they sit over the clips, don't want them to pop out. https://www.miataturbo.net/attachmen...ine=1461715033 https://www.miataturbo.net/attachmen...ine=1461715033 https://www.miataturbo.net/attachmen...ine=1461715033 Also discovered the voodoo box was flaking out. Turned out to be a bad connection by the ECU. Apparently, the previous owner thought that it would be just fine to twist and electrical tape critical wiring.... As soon as my friend's daily gets a new wheel bearing, he will begin fixing the wiring and getting the Link in. https://www.miataturbo.net/attachmen...ine=1461715033 |
That lathe is fuking cute!
Also, great idea. Although i dont think you needed to go so deep. :giggle: |
Originally Posted by hi_im_sean
(Post 1326939)
That lathe is fuking cute!
I am planning on doing the acetel bushings on it in the future. Also, great idea. Although i dont think you needed to go so deep. :giggle: Actually, I just wanted it deep enough the top of the sleeve didn't stick up past the top of the shock. It's 12mm on the front ones and 10mm on the back. |
The turbo mani is a work of art.
|
5 Attachment(s)
So after having the power to the wideband and auxiliary gauges go dead the other week, my friend has decided it is time to start dealing with the wiring in this car... I believe this sums it up nicely. :giggle:
https://www.miataturbo.net/attachmen...ine=1462379978 Attachment 232423 They cut the stock radio harness off and just twisted and electrical taped a new one on. :eggplant: :facepalm: :vash: https://www.miataturbo.net/attachmen...ine=1462379978 https://www.miataturbo.net/attachmen...ine=1462379978 https://www.miataturbo.net/attachmen...ine=1462379978 |
All times are GMT -4. The time now is 07:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands